ZGYMZN YMUS-ZM200 Ultrasonic Spray Coating Equipment

Ultrasonic spray machine-Laboratory coating preparation

* Suitable for laboratory level small area and R&D test use

Optional:

Scattering series, wide area series, gathering series, subtle series,Deep cavity series and other full series of ultrasonic sprinkler.

Device Features

◆ Ultrasonic spraying equipment, using ultrasonic sprinkler technology, can provide uniform and efficient film spraying;

◆ Coating thickness control precision: can prepare tens of nanometers to tens of microns of the coating, accurate control of coating thickness;

◆ Spraying uniformity: >95%;

◆ Solution conversion rate: ≥95%, 4 times traditional two-fluid spraying;

◆ XYZ three axis servo motion system;

◆ Full color touch screen control and friendly man-machine interaction interface;

◆ High precision laboratory injection pump;

◆ Wide range of liquid flow: 0.001ml/min - 50ml/min; (depending on the solvent and nozzle model)

◆ Imported high precision precision pressure reducing valve and liquid valve, to achieve high speed and stable gas and liquid coordination;

◆ Laser alignment: to assist users to locate the nozzle position easily and quickly;

◆ Built-in exhaust gas exhaust system, does not block nozzle technology, reduce maintenance costs;

◆ Micrometer micro hole vacuum suction heating, suitable for battery diaphragm and other flexible substrates; (extensible)

◆ Up to 750°C hot table, suitable for film preparation by spray pyrolysis; (extensible)

Optional accessories

◆ Dispersed liquid supply technology, can realize the suspension online dispersed stirring liquid supply, avoid the solid precipitation in the spraying process；

◆ Heating plate, realize the base online heating spraying；

◆ Vacuum adsorption heating plate: multi-area controllable adsorption, can be effective adsorption of soft film base；

◆ Special high temperature heating platform, the maximum heating temperature of 750°C, can realize spray pyrolysis film preparation；

Application

◆ New energy: fuel cells, membrane electrodes, thin film solar cells, proton exchange membranes, lithium battery membranes, perovskite solar cells, solar photovoltaic wafers, etc.

◆ Medical: balloon catheter, blood vessel syringe, stent, biosensor, microfluidic chip, heart valve, antibacterial coating, etc.

◆ Microelectronics semiconductor: silicon carbide seed adhesion, flux, photoresist coating, conductive coating, hydrophilic coating, conductive ink, PI, PET, etc.

◆ Glass production: glass coating, float glass, photovoltaic glass, photoresistance film, transparent conductive, electrochromic, etc.

◆ Nanotechnology: carbon nanotubes, polymer fibers, nanofilms, carbon nanotube films, MXenes, graphene composites, etc.

Basic parameter

◆ Equipment size: 1000mm*800mm*900mm

◆ Effective spraying area: 200mm*200mm (extensible)

◆ Power supply: 120V, 220V, ±10%, 50-60Hz

◆ Ultrasonic nozzle: can be equipped with a variety of nozzles

◆ Type: Ultrasonic spraying

◆ Positioning mode: laser positioning

◆ Telecontrol mode: XYZ three-axis linkage, can be programmed independently

Service enterprise