Z-Wave Siren Alarm

Introduction

Siren alarm is an intelligent device that can be controlled remotely by the radio frequency. Siren alarm send messages via Z-wave network to the Z-Wave main controller. In the Z-wave network communications, Siren alarm can be connected to any Z-wave main controller, Different countries or areas, the radio frequency of the Z-wave network is different . In the communication between the Siren alarm and Z-wave main controller, the siren alarm can both send and receive messages. When press the code button of siren alarm, it will send message to the Z-wave main controller, the Z-wave main controller can display the on/off status of the siren alarm; when the siren alarm receives messages from the Z-wave main controller, the siren alarm will be triggered. The siren alarm is battery powered, small and easily install. When siren alarm is working, LED light will flash, and there will be alarm sound at the same time. The sound is not lower than 90 decibels.

Parameters

1. Model: COL-SR01Z, COL-SR02Z

2. Compatible with 300 series and 500 series

3. Power supply: CR123A x 2 Or 5V/2A USB charger(ZW-SIA01 support USB)

4. Stand-by time: 1 year

5. Radio Frequency: 868.4MHz EU; 908.4MHz US

6. Compatible with 300 series and 500 series

7. 10 sound can be select

8. Range: up to 70m outdoor, 50m indoor

9. Radio Protocol: Z-wave

10. Sound intensity: >90 dB

11. Operation temperature: 0~40℃

12. Storage temperature: 0~60℃

13. Product size(L*W*H): 70 x 68 x 31mm

Features

When the siren alarm triggered, it will make alarm sound and LED light flash at the same time.

When the other sensor is triggered, the siren alarm can associate with the sensors through the Z-wave network.

Siren alarm can be controlled remotely via mobile phone App.

Easy installation on wall or any surface

Compatible with any Z-wave controller.