Uv quartz sleeve
Quantity : MOQ 1PCS Price : Min USD1
Good quality and reasonable price of quartz tubes made in China.
1. quartz tube: OD3mm-420mm
2. Wall thickness : 1mm-10mm
3. Length : max1240mm (or according to your special requirement)
4. purity : 99.99% min
5. Shape : Both ends open/ One end close
5. Resistance 1100 degree, 1000 long time work
6. Low OH
7. Nice Appearances
8. Strong Corrosion-resistant
9. Good thermal stability
10. Good transparency for light>90%
11. Good electrical insulation
12. Special dimension and tolerances are available upone requests
13.Useful : electric light source, semiconductor,optical, photovoltaic,chemical industries
· GOOD QUARTZ MATERIAL
· STRICT CONTROL OF THE PRODUCTION PROCESS
· GOOD QUALITY
· COMPETITIVE PRICES
· ON-TIME DELIVERIES
· GOOD AFTER-SALE SERVICE
We can also make tubes according to your requirement!
Dimensional Tolerance
Range of OD |
OD |
WT |
Siding |
Out of Round |
Bow1220mm |
≤6mm |
±2.0% |
±10% |
12% |
2.0% |
2.5mm |
6.00-15.00mm |
±1.25% |
±8% |
10% |
1.5% |
2.5mm |
15.00-20.00mm |
±1.25% |
±10% |
15% |
1.5% |
2.5mm |
20.00-25.00mm |
±1.25% |
±10% |
15% |
1.5% |
3.0mm |
25.00-30.00mm |
±1.35% |
±12% |
15% |
1.5% |
3.0mm |
30.00-80.00mm |
±1.5% |
±14% |
15% |
2.0% |
3.0mm |
80.00-100.00mm |
±1.0% |
±0.5mm |
15% |
2.0% |
3.0mm |
100.00-120.00 |
±1.5% |
±0.8mm |
15% |
2.0% |
3.0mm |
120.00-160.00 |
±1.8% |
±1.0mm |
20% |
2.5% |
3.0mm |
160.00-180.00 |
±3.0% |
±1.0mm |
25% |
2.5% |
3.0mm |
180.00-200.00 |
±4.0% |
±1.5mm |
25% |
2.5% |
3.0mm |
200.00-240.00 |
±4.0% |
±1.5mm |
25% |
2.5% |
3.0mm |
240.00-280.00 |
±6.0% |
±2.0mm |
25% |
2.5% |
3.0mm |
280.00 above |
±8.0% |
±3.0mm |
25% |
2.5% |
3.0mm |
Chemical composition (ppm)
AL |
Fe |
K |
Na |
Li |
Ca |
Mg |
Cu |
Mn |
Cr |
B |
Ti |
5-12 |
0.19-1.5 |
0.71-1.6 |
0.12-1.76 |
0.38-0.76 |
0.17-1.23 |
0.05-0.5 |
0.05 |
0.05 |
<0.05</p> |
<0.1</p> |
<1.0</p> |
Spectral transmission at 1.0mm thickness
mm |
<220</p> |
255 |
280 |
315 |
350 |
38 |
590 |
780 |
% |
89 |
91 |
93 |
93 |
93 |
93 |
93.2 |
93.4 |
Physical Properties
(g/cc)Density20 °C kg.m-3 |
2.2 |
Degree of Hardness Moh's Scale |
5.5-5.6 |
Softening point(degree) |
1683 |
Annealing point |
1215 |
Defoamation Point |
1120 |
We are a manufacturer of quartz tubes with well-eq acilities and strong technical force.
The factory is located in Donghai County which is the famous hometown of crystal in China
,with convenient transportation access.
Contact : Kathy Xu, +86 518 87800686
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Uv quartz sleeve Search in a category : Stock lots Search in a category : sleeve, quartz |
Thursday, April 11, 2024
Based on millions of user data, the ‘Attention' mechanism & ‘Deep Learning Technology' of the convolutional neural network, the ‘shecare+' algorithm can accurately identify most of the colloidal gold test kits on the market. Widely used semi-quantitative recognition algorithms...
Shecare-ikangtai
- 100084 - Haidian
- 86 010 56231097
Saturday, September 10, 2022
Graphite products of vacuum furnace are increasingly widely used in high temperature graphite furnace. They are not only used to manufacture heating graphite rods element and heat insulation screen of vacuum furnace, but also used to manufacture structural parts such as bracket, material tray...
Pingdingshan Wanhui Graphite Co., LTD
- 467000 - Pingdingshan
- 0375 6506966
- 86 15539792960
Friday, May 31, 2024
Price : $12~15/kg
Tetra specialty resin chemical offers two product categories with speciality resin and glycidyl amine epoxy resin. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely applied...
Jiangsu Tetra New Material Technology Co., Ltd.
- 201615 - Songjiang
- 0086 2154265697