Raw materials

Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds

Quantity : 60t/Month   Price : USD8.52 / kilogram

Description of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:


Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 4-6 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craft works, lightings, candles, etc. And fabrication of precision molds.

Specification of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:

Model

Mixing Ratio

Color

Hardness

Viscosity

Working Time

Curing Time

Tear-

Strength

(kg/cm)

Tensile- Strength

(Mpa)

Elongation

(%)

Shrinkage

(%)

J825

1: 1

translucent

25±2

10000

±2000

1-60mins

0.5-24h

20±3

≥5.0

≥400

<0.1</span>

Features of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:

- Outstanding release properties
- High Flow-ability and long working time
- Medium Hardness
- High tear resistance
- High elasticity for easy removal of complex replica parts

Materials you can cast into cake, chocolate,cookie molds

A: Cultural relic duplication, architectural decoration, statues
B: Polyester Resin crafts
C: Lighting ornaments, soap, candles molding
D: Plaster, Gypsum, Cement, Concrete decorations
F: Model design, product exploitation, etc.

Instructions of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:


1-Take 100g of part A and add 100g of part B and mix the two parts silicone rubber evenly.

2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available

3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.

Storage and Precautions of Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds:

Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

If you need any help on silicone rubber, please feel free to contact Mr Jack:

Contact: Mr. Jack

Email: jack.ottsilicone(at)foxmail.com

Location : First Floor, Building A1, Tangkou 236 Industrial Zone, Tuanjie Village, Xinhua Street, 510800 Guangzhou,
Contact : Jack HU, +862086819712

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Two Parts Liquid Addition Cure Silicone Rubber for Food Grade Molds

Search in a category : Raw materials
Search in a category :
rubber, liquid, cure, addition, food, silicone, parts
Indonesia 20226 Sport goods
2022 Scott Plasma RC Ultimate Triathlon Bike (CALDERACYCLE)

Wednesday, September 06, 2023

Quantity : 20 - Price : 8 819,00 €

Buy 2022 Scott Plasma RC Ultimate Triathlon Bike from Calderacycle is 100% safe, Because purchase products at Calderacycle provide 100% moneyback guarantee To purchase online visit our website : https://calderacycle.com Price : USD 8819 Min Order: 1 Unit Lead Time: 7 Days Port : Kualanamu...

CALDERACYCLE

  • 20226 - Kota Medan
  • +6282268116904
France 467000 B2B Services
GRAPHITE ROD ELECTRODE

Saturday, September 10, 2022

Graphite is widely used in the electrical industry as electrode, brush, carbon rod, carbon tube, positive electrode of mercury rectifier, graphite gasket, telephone parts, television picture tube coating and so on. Among them, graphite rods for electrolysis is the most widely used...

Pingdingshan Wanhui Graphite Co., LTD

  • 467000 - Pingdingshan
  • 0375 6506966
  • 86 15539792960
Turkey 34750 Construction goods
Construction Materials

Thursday, November 24, 2016

From construction materials to equipments, from hardware & tools to the personal protection eq​uipments and from insulation materials to the equipments used in places of all parts in your construction. It is now easier & cheaper to find whole range of the products regarding...

ERTOK BUILDING MATERIALS CO

  • 34750 - İSTANBUL
  • +90 530 390 73 55
  • +90 542 895 3455