TTC400A Cable Tool Setter Unit
Quantity : 50000 piec Price : USD2000
Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the probe factory gradually focused its main business on developing CNC machine probing, the production, and sales of CNC touch probe & setter system.
TTC400A cable tool setter unit is a product specially developed by our company for replacing some vulnerable tool setting units that is part of the swing-arm for setting the cutting tool in the CNC lathes. It is suitable for various specifications of CNC lathe, turning machine center and CNC milling -turning center.
TTC400A lathe tool setter unit is a product specially developed by our company for replacing some vulnerable tool setting units that is part of the swing-arm for setting the cutting tool in the CNC lathes. It is suitable for various specifications of CNC lathe, turning machine center and CNC milling -turning center.
Parameter of TTC400A Cable Tool Setter Unit
TTC400A: |
|
Measuring direction |
±X, ±Z,±5 mm |
Repeatability (2σ) |
≤ 2 μm; |
Diameter of the four ceramic touching pillar |
5.0 mm |
Hardness of the touch face |
HM8.5 |
Input voltage |
24±10% VDC |
Output load current |
50 mA |
Seal grade |
IP68 |
Application of TTC400A Cable Tool Setter Unit
- TTC400A used with a high-precision motorized tool setting arm, which can realize in-sequence tool setting and tool breakage detection without operator intervention.
- For tool measuring and broken tool detection on 2-axis and 3-axis CNC lathes.
- Replacement of some vulnerable tool setting units.
Technical Characteristics of TTC400A Cable Tool Setter Unit
- As shown in the picture, the installing structure and size of the tool setter unit are exactly the same as the replacement;
- Tool setter unit transmits tool setting signal through cable;
- It is ensured during manufacturing that the position relationship between four pillars of the tool setter unit and mounting base;
- One LED indicator light is used to display the tool setter's working state.
- Signal model and LED instruction: high electric level output with normal signal state, LED normally on; When any one pillar is triggered, the signal output point is suspended and the LED is off;
Contact : eer Pion, 0451 82285451
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of TTC400A Cable Tool Setter Unit Search in a category : Equipment goods Search in a category : tool, cable, ttc400a, unit, setter |
Friday, May 16, 2014
Quantity : 50000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406
Monday, March 04, 2013
Quantity : 30 - Price : $395.00
It's not just phone we're talking about... it's smart phone... it's Samsung GALAXY S III. It has the looks and a symmetry which would make you proud to hold it in your hands. You couldn't ask for more imposing façade than its 4.8 inches HD Super AMOLED high-definition display. It delivers...
Friday, May 16, 2014
Quantity : 500000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406