Equipment goods

TRANSPORTABLE CONTAINER BLAST ROOM

Quantity : 100 units   Price : RMB: 50000-200000

The movable sandblasting room or portable blast room, abrasive recovery system, dust collector, portable shot blasting machine together, it can be transported to the site by flatbed truck. The installation time is less than 2 hours, which is the best equipment for field-flow operation.

Transportable container portable shot blaster room features:

The whole blasting room adopts container installation, which can be transported from one place to another easily and convenient for sand blasting;

The portable sand blasting booth does not need foundation pit, can be placed on the ground directly, which reduces the investment cost of the equipment;

The transportable container blast room is suitable for a wide range of abrasive media including but not limited to: steel shot, steel grit, chilled iron, aluminium oxide, glass bead, etc.

The transportable container blast room can quickly change the type of abrasive, the abrasive can be quickly replaced according to the process requirements to realize the processing of workpieces with different materials.

The dust collector for sandblasting room adopts the filter cartridge type dust collector, which fully meets the environmental protection requirements.

Transportable container blast room fitted out with :

Main doors suitable interlocked – to prevent blasting with doors open.

Operator door – as a means of exit if main doors are stuck, also interlocked.

LED lighting.

Emergency lighting.

Steel floor with side shedders.

Cross screw conveyor at the bulkhead.

Air inlets providing ventilation for blast room and good operator visibility.

Shot-blast quality rubber lining of room.

Shot Blasting Machine

QINGGONG MACHINERY shot blasting machine offers you an effective solution to deal with the surface of the workpieces, including remove the contaminant on the surface, clean and roughen a smooth surface before applying a primer or coating to the workpiece. More specifically, the treatment of a shot blasting machine includes derusting, descaling, desanding, or deburring of the workpieces. Other uses are such as surfaces shot peening, finishing, and roughening of surfaces so as to make coat better.

As the shot blasting machine manufacturer, QINGGONG MACHINERY mainly supplies four types of partial reclaim systems, including sweep-chute floor, single screw, H-shaped partial reclaim system, and U-shape partial reclaim system.

QINGGONG MACHINERY also offers a full spectrum of blast room reclaim floor designs and configurations. Our full floor reclaim system requires merely a shallow concrete foundation. The type of sandblasting room is carefully designed to lift working effiency.

Location : No 377, Langyatai S Rd, Huangdao District, Qingdao City, China, 266400 Shandong,
Contact : Sara Sara Li, 0532 82121566

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
TRANSPORTABLE CONTAINER BLAST ROOM

Search in a category : Equipment goods
Search in a category :
container, blast, transportable, room
France 361002 Second hand goods
Cheap plastic cnc prototypes

Friday, May 16, 2014

Quantity : 50000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd

France 361002 Second hand goods
China custom made CNC rapid prototype

Friday, May 16, 2014

Quantity : 500000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd

Thailand 50000 Food
2016 new crop IQF frozen/canned shiitake mushrooms

Wednesday, February 17, 2016

Quantity : 2000mt / m - Price : $12/ Carton

Product Specification: Canned Mushrooms Product Name Specification Net Wt. Drained Wt. Tins/Carton CTNS/20'FCL Mushrooms 184g x 24tins 184g 114g 24 3500 284g x 24tins 284g 156g 24 2450 400g x 24tins 400g 200g/230g 24 1800 425g x 24tins 425g 200g/230g 24 1750 800g...

KHUN JACK PARTNERSHIP LIMITED

  • 50000 - CHIANG MAI
  • +66 9 56 19 49 81