Storage and use of solvent-based aluminum paste
Storage and use of solvent-based aluminum paste
Aluminum paste contains a certain amount of slow-release mineral oil, additives, etc. to ensure its good storage stability and dispersion. Therefore, the storage of aluminum paste requires a well-sealed package and should be stored in a dry room (below 35 degrees). If a package cannot be used for one-time use after opening, it must be sealed intact immediately. Otherwise, if it is exposed to air for a long time, it will cause air-drying and oxidation, resulting in poor dispersion of the raw materials, granulation of the paint film, blackening and coarsening. After leaving the unused aluminum paste for a period of time, please be sure to test the sample before using it.
The key to the application and operation of aluminum paste lies in the dispersion link:
1.The aluminum paste is pre-dispersed in the solvent, added with an appropriate wetting agent, can be soaked for a period of time, then slowly stirred into a uniform and thin paste, and finally added to the pre-prepared paint, the best process effect can be obtained .
2.When dispersing aluminum paste, the commonly used solvents generally include: esters, ether s, s, aromatics, etc., among which esters have the best effect. In addition, it is also required that the solvent does not contain water, otherwise the aluminum pigment will easily react with water and cause instability. From this point of view, aromatic solvents generally have lower moisture content, which seems to be better.
3.The ratio of aluminum paste to pre-dispersed solvent is generally 1: 1—1: 2.
4.In the dispersing process of aluminum paste, high shear force should be avoided for stirring, which will easily cause the deformation of thin aluminum flakes, thereby affecting the appearance effect, so low speed and slow stirring should be used to disperse. The best dispersion speed and time should be determined through experiments.
5.Aluminum paste also has certain requirements for the paint. If the acid value of the paint is too high, it will affect the storage stability of the paint and cause the aluminum pigment to become black and rough.
Suggested aluminum paste addition ratio:
Adding ratio of colored primer aluminum paste: 1-4%
Adding ratio of aluminum paste for pure silver primer: 4-10%
Adding ratio of aluminum paste in single-layer metallic flash paint: 5-13%
Anti-corrosion paint and coil coating aluminum paste addition ratio: 10%-13%
Contact : Gideon hu, +13 5 90 97 39 64
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Storage and use of solvent-based aluminum paste Search in a category : Raw materials Search in a category : aluminum, storage, solvent, based, paste |
Thursday, April 18, 2024
TEM DESCRIPTION 1. Model Number: CJ750B 2. Material: iron, painted 3. Style: Classic military theme 4. Color: matted black 5. Engine: 750cc 6. Customization: is welcomed, we can do patterns on car body 7. Available Colors: any color 8. MOQ: 1 piece 9. Optional capacity:...
Shenzhou Technology Co., Ltd
- 412000 - Zhuzhou
- +86 13762331533
Thursday, April 18, 2024
Product description: TJM-E300 is a new portable printer designed for the printing service of mobile bill printing technology, simple fashion design, strong technology. Integrated into a number of cutting-edge technology: intelligent power saving and power control, variable speed printing...
Shenzhen CloudTai Hongda Technology Co.,LTD
- TJM printer
- 518110 - Longhua
- 86 755 36607643
- 86 13715300583
Thursday, April 18, 2024
AT103 SERIES UNIVERSAL TESTING MACHINE Application: AT103 Series Universal Testing Machine is suitable for tensile, compression, bending, shearing, peeling, tearing and other mechanics performance tests of plastics, rubber, textile, geosynthetics, non-metallic and composite materials...
Anytester (Hefei) Co., Ltd.
- 230601 - Hefei City
- +86 186 18655041869