Silicone gel with good repairability
Before the curing
Appearance | A: Trasparent B: Blue |
Relative Density | 0.96~1.00(g/cm3) |
Viscosity At 25℃ |
A: 650~850 B: 650~850 (mPa·s) |
After the curing
Degree | 240~280 |
Fire resistance Flameout Time | <16s |
curing time | <2h |
Complete time | >4h |
1.Features
ZS-GN01A/B is a kind of two-component additional silica gel. This product has the properties such as high strength, good adhesion, excellent flexibility and high elongation. It could still keep good performance after operating several times.
2.Applications
•Well protect against moisture,dust,shaking and excellent insulating property in electronic components and assenmly.
•Internal coating material in transistor and intergrated circuit.
•Trasparent power pouring material.
•Elastic adhesive in optical instrument.
•Silicone bra for women.
•Physical property paremeters
3. Instructions
•A, B glue mix according to the weight of the 1: 1 ratio,and only after the row of bubble it can be used.In order to improve the bubble velocity,empty after row and bubble in the process of mixing, and repeat the above step for two to three times.
•It should be thoroughly remove oil, dirt and other material on the base material before we use the glue.
•Operable time: 15~30min(30℃), the time of start curing: 50~60min(25℃), Complele curing time: 12h(25℃), 60min(100℃).
4. Note
There are some materials, such as chemical additives, curing agent and plasticizer can inhibit the curing of our glue.These
materials include:
•Organic tin and other metal compounds.
•Sulfur, polysulfide, polysulfone or other sulfur containing items .
•Amine, polyurethane rubber or other ammonia containing items.
•The phosphorus or phosphorus containing items.
•Some of the flux.
If in doubt, it is recommended that first before use, first do the applicability test.
5. Packaging
Sample: 10 kg/barrel, 20 kg/barrel, 40 kg/barrel, 50 kg/barrel.
6. Storage and transportation
•The product must be stored in a cool, dry environment below 25 ℃, can be storaged below 25 ℃ for six months.
•Such products are non-dangerous goods, can be transported as common chemicals. Be careful during transport and
prevent the leakage.
•Should be recognized before being used with or without abnormal if the products exceeding retention period.
Contact : jiang selina, +086 0769 88888312
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Silicone gel with good repairability Search in a category : Stock lots Search in a category : good, repairability, silicone |
Friday, May 10, 2019
Inside ASTM A320 several grades are included, including both austenitic steels and ferritic designated L7, B8, etc. According to ASTM A320 Bolts mechanical tests shall be conducted on the material, namely: tension testing, impact testing and hardness testing.we are largest astm a320...
Micro Metals
- 400004 - Mumbai
- +912266595495
Saturday, December 19, 2020
Quantity : 1 - Price : $ 1260
Genuine Printhead Xaar 1001 GS12/GS6 The Xaar 1001, available in two drop size variants, is a unique piezoelectric drop-on- demand printhead that delivers unrivalled reliability for single-pass printing applications such as labels, packaging, ceramics, advanced manufacturing and other...
Printpartin
- 90125 - Makassar
- +62 4 11 43 75 03
Saturday, September 21, 2019
The MH505L sinker drill is a time-tested and proven choice. This low-cost pneumatic jackhammer dominates the markets of India and Brazil due to its high return on investment and is designed for drilling through granite, hard-faced rock, quarry drilling, bench drilling, and drilling...
MINDRILL SYSTEMS & SOLUTIONS PVT LTD.
- 711411 - Howrah
- +91 98305 52526
- 9830594274