Sand-Lime Brick production line
Sand-Lime Brick Production Line(http://www.chinablockmachine.com/product/ps_4_32_1.html) project introduction
1. Sand-Lime Brick production line raw materials Storage and Mixture Preparation
1.1 Quick Lime
After transported to the factory, the massive lime will be poured into the receiving hopper by the forklift. It will be smashed by the jaw crusher before delivered into the silo by the bucket elevator. In the silo, the lime will be fed into the milling equipment for fine grinding. Then, you can use the lime powder to make the cementing materials. Later, the bucket elevator will convey the cementing materials to the cement silo.
1.2 Coal Ash
The bucket elevator will put the wet coal ash onto the batching scale for measuring.
1.3 Sand
Sand will be transported to the factory, and piled in the designated area. It will be then conveyed into the batching machine by the bucket elevator.
2. Batching and Mixing
The above materials after measured, will be discharged into the mixer in order. Prior to the initial mixing, you need to add water. The mixed material will be sent into the continuous slaking silo. And then, it will be mixed once again in the edge mill or mixer. If necessary, you can add some water when mixing. Finally, the belt conveyor will convey the mixtures to the hopper of the brick molding machine.
3. Green Brick Forming
The mixtures inside the hopper of the block molding machine will be fed to the mould, and the green bricked is formed. On average, the molding cycle will be 13 to 17 seconds. Via the articulated robot, belt pulley, and automatic stacker crane, the green brick will be piled onto the autoclave trolley.
4. Curing and Storage
The autoclave trolley on which green bricks are stacked, will be sent to the autoclave for curing by the dragger. When the curing is over, the dragger will pull the autoclave trolley together with the bricks out of the curing system. The finished bricks will be unloaded from the trolley. Meanwhile, they will be inspected, and stacked after classified.
Contact : daisy xu, 865398036228
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Sand-Lime Brick production line Search in a category : Equipment goods Search in a category : lime, production, sand, brick |
Tuesday, January 14, 2025
Quantity : 22 Ton as - Price : It depends on the ha
1) Product: 100% Wood charcoal on granulometry between 2mm and 35mm – Type 01 - Granulometry = 2mm up to 35mm. * End uses: This type of charcoal containing granulometry between 2mm and 35mm is suitable and consumed in large, medium and small steel industries for the production of...
Supply Lumber Co.
- supplylumber
- 80050240 - Curitiba
- (55) 41 32626261
- +55 41 991838538
Friday, December 30, 2016
Quantity : 30pcs - Price : 117,00 €
Advantage 1.High invert efficiency and rapid start; 2.Great physical performance; 3.Low self-discharge rate; 4.Reasonable price; 5.Professional Li-battery customization. No Item Parameter Remark 1 Rating Voltage 24 V 2 Rating Capacity 11Ah Customized 3 Minimum Capacity 10...
Shenzhen Believe Technology Co.,Ltd
- 86 - BaoAn District
- 008613590311520
Thursday, August 24, 2023
The epidemic accelerated technological change into the era of Industry 4.0, and high-tech electronics industry manufacturers will be under continuous pressure to innovate and manage advanced production equipment in factories through smarter ways to further optimize maintenance management...
- 200030 - shanghai
- 021 6958 0696




