RTV 2 molding silicone rubber for ornament
Quantity : 200kg(MOQ) Price : USD6.69/kg
RTV 2 molding silicone rubber for ornament
Introduction of RTV 2 molding silicone rubber for ornament :
- Two-part of RTV 2 molding silicone rubber: flowable liquid silicon and catalyst.
- RTV 2 molding silicone rubber cures at room temperature within 4-6 hours.
Application of RTV 2 molding silicone rubber for ornament :
RTV 2 molding silicone rubber is mainly applied for making various molds:
RTV 2 molding silicone rubber can used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.
RTV 2 molding silicone rubber can used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.
RTV 2 molding silicone rubber can also used to reproduce soaps, candle & lighting.
FEATURES of RTV 2 molding silicone rubber for ornament :
- RTV 2 molding silicone rubber has an exceptional fluidity and good operability.
- RTV 2 molding silicone rubber has good Temperature and deformation resistance as well as low shrinkage.
- RTV 2 molding silicone rubber has High duplication times.
Operation step for RTV 2 molding silicone rubber for ornament :
- Step One to use RTV 2 molding silicone rubber: Take 100g of part A and add 2g of part B and mix the silicon rubber and the curing agent evenly.
- Step Two to use RTV 2 molding silicone rubber: vacuum pumping
- Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
- Step Three to use RTV 2 molding silicone rubber: Brushing cast & Perfusion Molding operation.
silicone rubber RTV-630#:
Usage: Silicon rubber for PU/poly resin products, plaster, candles, gypsums crafts, cement products, concrete/architectural products, statuary, casting molds making, etc.
|
Model |
630# |
|
Appearance |
white |
|
Mixing proportion of curing agent (%) |
5% |
|
Operating time (mins 25 0C ) |
20-40 |
|
Curing time(hours 25 0C) |
3-5 |
|
Hardness (A°) |
30±2 |
|
Density ( g/cm 3 ) |
1.08 |
|
Viscosity (Mpas -25 0C) |
21000-23000 |
|
Tensile-strength(kgf /cm2 ) |
≥40 |
|
Tear-strength (kgf /cm ) |
≥30 |
|
Elongation-break(%) |
≥ 450 |
|
Retractility(%) |
≤0.3 |
Any questions of RTV 2 molding silicone rubber, please feel free to contact Ms Vicky:
TEL: 0086-755-89948013
FAX: 0086-755-89948030
MOBILE: 0086-18938867569
E-mail: hyz (at) szrl (dot) net
Contact : Tiffany Van, 0086 755 89948294
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of RTV 2 molding silicone rubber for ornament Search in a category : Raw materials Search in a category : ornament, rubber, molding, silicone |
393002 B2B ServicesReport abuse
Sunday, May 31, 2020
Both pigments and dyes are used to color different materials, but the way in which they do it is very, very different. It's all got to do with solubility – the tendency to dissolve in a liquid, especially water. Think for a moment of two glasses of water standing side by side – the...
Darshan Industries - Dyestuff Manufacturer & Exporter
- 393002 - Panoli
- 9898989898
394116 B2B ServicesReport abuse
Friday, December 27, 2019
Qualitron Chemicals the manufacturer and exporters of Phthalocyanine Pigments is an Evolving Firm built with a vision of producing industry standard Pigments.Along with Domestic supplies, we export our pigments to End users as well as to the traders, distributors of various countries...
QUALITRON CHEMICALS - Phthalocyanine Pigments Manufacture
- 394116 - panoli
- 9898989898
59590 B2B ServicesReport abuse
Wednesday, September 14, 2016
Quantity : 500 - Price : 50,00 €
Swing Check Valve DIN Standard Swing Check Valves (DIN 3202 F6 ,DIN 3202 F1) DIN F6 Swing check valve DIN F1 Swing check valve DIN Rückschlagklappe DIN Válvula de retención clapeta oscilante DIN Zpětná klapka stavební délka dle DIN EN558-1 serie 48 & serie 1 DIN Standard...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
