RP-1H steam pressure regulating valve
Brief Introduction.
This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane, spring and adjusting spring. The product made big improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure, change the sealing manner, improve the pilot structure and manner of adjusting spring, thus to improve the performance of the product in aspects of sensitivity, flow, and service life. The product is mainly applied on steam piping, to reduce and regulate the pressure.
Field of Application.
Pressure Rating: 1.6- 16.0 Mpa.
Nominal Diameter: DN15-500 mm.
Body Material: Steel, CF8.
Standard Flanges: DIN, ANSI, JIS.
Contact : Yoki Lee, 86 577 57781017
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of RP-1H steam pressure regulating valve Search in a category : Equipment goods Search in a category : valve, regulating, steam, pressure |
Thursday, October 29, 2015
AKSA PEYZAJ and PARK TASARIM, which have been designing and manufacturing city furniture and playground equipment since they were established in 1996 ,have joined forces for children all over the world and have become AKSAPARK KENT MOBILYALARI INC. AKSAPARK, which offers high quality...
Aksapark Kent Mobilyaları
- aksapark
- 06380 - Sincan
- +903122671100
Thursday, September 03, 2009
: Grand vitara ,Swift,Alto, Wagon r, SX4 , ,GYPSY 410 & 413 ,BALENO ,MARUTI 800CC HYUNDAI I-10 ELANTRA,SONATA,TUCSON ,ACCENT Shock Absorbers , Water Pumps Brake Shoe and Disc Pads • Gaskets • Engine parts • Gear parts • Carburetors. Lock sets . Combination switch . Head lights . Tail light ...
rapid car care center
- meetu
- - new delhi
- 011 29814923
- 9810067579
Thursday, June 16, 2016
Application Method 1. Glue is applied on textile or leather. 2. Patterned or fully coated glue is fixed by heat before foil transfer properly. 3. Stamping the foil ,heat: 130C-150C, pressure 4-6 bar, touch time 3-5 s. 4. Discard the carrier film after stamping process.Different...
UES Makine Tekstil Inşaat ve Gida San.Tic.Ltd.Şti
- 34510 - Istanbul
- +902125571040




