RJ45 SPD 10/100/1000Mbps network signal surge arrester ethernet surge protection device
Quantity : 2000pcs pe
Data line protector series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance over voltage.
Features Of China SPD For Network / Data Line Surge Protector
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
RJ45 connector
Application Of SPD For Network / Data Line Surge Protection Device
CAT6/6e, cat5/5e compatible
10/100/1000Mbps Base-T Ethernet protection
LAN, FDDI,CDDI, ATM
PDH, SDH, SPDH
Industrial control
Loss prevention system device; Security system; Security integration.
IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system
Specification Of SPD For Network / Data Surge Protector 100Mbps D05J4 series
Model |
D05J4 |
D05J4-8 |
D05J4-16 |
D05J4-24 |
D05J8H |
||||
Lightning projection zone(LPZ) |
2 |
||||||||
Standards Compliance |
IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 |
||||||||
According to IEC61643 |
III |
||||||||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||||||
Max continuous operating voltage Uc |
5V |
||||||||
|
3KA |
||||||||
|
5KA |
||||||||
Voltage protection Level @C2(8/20µs) Up |
≤55V |
||||||||
Voltage protection Level @C3(1kV/µs) Up |
≤25V |
||||||||
Rated load current IL |
200mA |
||||||||
Limiting Voltage(10/700µs) |
≤20V |
||||||||
Cut-off Frequency fG |
250MHz |
||||||||
Response time tA (L-N/N-PE) |
1ns |
||||||||
Protection line |
1/2,3/6 |
1/2,3/6,4/5,7/8 |
|||||||
Protection port |
1 |
8 |
16 |
24 |
1 |
||||
Mounting |
Be Installed between protected equipment and signal line |
||||||||
Adapt Transmission rate |
100Mbps 1000Mbps |
||||||||
Transmission standards |
100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6 |
||||||||
Dimension |
85(H)×25(W)×25(L)mm |
190 (H)×85(W)×48(L)mm |
482 (H)×86(W)×44(L)mm |
83 (H)×25(W)×25(L)mm |
|||||
Interface form |
RJ45 |
||||||||
IP code(IEC EN 60529) |
IP20 |
||||||||
Error rate |
≤10-12 |
||||||||
Material/color |
Aluminum/Blue |
||||||||
Insertion loss |
≤.3.0dB |
||||||||
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95% |
Model |
D05J8 |
D05J8-4 |
D05J8-8 |
D05J8-16 |
D05J8-24 |
||
Lightning projection zone(LPZ) |
2 |
||||||
Standards Compliance |
IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002 |
||||||
According to IEC61643 |
III |
||||||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||||
Max continuous operating voltage Uc |
5V |
||||||
|
3KA |
||||||
|
5KA |
||||||
Rated load current IL |
200mA |
||||||
Limiting Voltage(10/700µs) |
≤20V |
||||||
Cut-off Frequency fG |
250MHz |
||||||
Response time tA (L-N/N-PE) |
1ns |
||||||
Protection line |
1/2,3/6,4/5,7/8 |
||||||
Protection port |
1 |
4 |
8 |
16 |
24 |
||
Mounting |
Be Installed between protected equipment and signal line |
||||||
Adapt Transmission rate |
1000Mbps |
||||||
Transmission standards |
10BaseT/ 100BaseT/1000Base TX,CAT5/CAT6 |
||||||
Dimension |
85(L)×25(W)×25(H)mm |
106(L)*75(W)*31(H)mm |
190 (L)×85(W)×48(H)mm |
482 (L)×86(W)×44(H)mm |
|||
Interface form |
RJ45 |
||||||
IP code(IEC EN 60529) |
IP20 |
||||||
Error rate |
≤10-12 |
||||||
Material/color |
Aluminum/Blue |
||||||
Insertion loss |
≤0.5dB |
||||||
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95% |
As a spd supplier, we will do our best to meet all the needs of customers.
Contact : win Tech, 0755 86215101
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of RJ45 SPD 10/100/1000Mbps network signal surge arrester ethernet surge protection device Search in a category : Electronics / Computers Search in a category : rj45, surge, arrester, network, 1000mbps, signal, ethernet |
Tuesday, March 08, 2016
Quantity : 100~500
Bubble Bath Spa Massager MSW-104 Bubble Bath Spa Massager is a new generation of home spa massager and is optimized for use in bath with the quality of tranquility, relaxing and luxury life. Configuration of MSW-104 is One-Touch Control Panel with Minimal and fashionable design...
LienJie International Ltd.
- 414 - Taichung City
- +886 4 23367128
Tuesday, July 21, 2015
Quantity : 100
Marque du produit : Type LED : COB Matériel : Aluminium Puissance : 20 W Angle : 10 Degrés CRI >80 Lumens : 1400 LM Voltage : 85-265V Couleurs disponibles : Blanc Chaud (2700K) Blanc Neutre (4500K) Blanc Froid (6000K) Poids : 760 Gr Garantie : Jusqu'à 6 ans Info Contact ...
Blaz Project
- 27000 - Evreux
- 02 34 08 77 30
Thursday, November 15, 2007
WSC SARL Contact : Velizar Todorov (Mr) Tel : 00352 22 9999 5523 Mobile : 00352 661 655565 Fax : 00352 22 9999 5499 Luxembourg Lot de Barrières autoalimentées, télécommandées, pour protéger un parking privé ou empêcher le passage vers une voie d'accès privée. Prévue pour les emplacements...