R-PLANE (1-102) SAPPHIRE WAFERS
Quantity : 30000 pcs Price : 4.2-10
R-PLANE (1-102) SAPPHIRE WAFERS
R plane sapphire wafers are preferred for the hetero-epitaxial deposition of silicon used in microelectronic IC applications. R plane is the non-polar plane of sapphire. So the different positions of R-plane in custom sapphire optics devices, the mechanical, thermal, electrical and optical properties of sapphire devices will vary greatly, which will also affect the subsequent processing performance, processing efficiency and processing yield of sapphire devices.
In order to make the crystal structure of sapphire ingot and subsequent sapphire products consistent, the more common method is to process an A-direction surface on the sapphire ingot as the flat orientation of the polished sapphire wafer (subsequent sapphire products), so that the R-direction position of sapphire ingot and the wafer is consistent.
Specifications of R-Plane (1-102) Sapphire Wafers
|
Item |
2 -inch R-plane(1-102) 430μm Sapphire Wafers |
|
|
Crystal Materials |
99,999%, High Purity, Monocrystalline Al2O3 |
|
|
Grade |
Prime, Epi-Ready |
|
|
Surface Orientation |
R-plane(1-102) |
|
|
Diameter |
50.8 mm +/- 0.1 mm |
|
|
Thickness |
430 μm +/- 25 μm |
|
|
Primary Flat Orientation |
45 +/- 1deg. counter-clockwise from C-axis projection on R-plane |
|
|
Primary Flat Length |
16.0 mm +/- 1.0 mm |
|
|
Single Side Polished |
Front Surface |
Epi-polished, Ra < 0.5 nm (by AFM) |
|
(SSP) |
Back Surface |
Fine ground, Ra = 0.8 μm to 1.2 μm |
|
Double Side Polished |
Front Surface |
Epi-polished, Ra < 0.5 nm (by AFM) |
|
(DSP) |
Back Surface |
Epi-polished, Ra < 0.5 nm (by AFM) |
|
TTV |
< 10 μm |
|
|
BOW |
< 10 μm |
|
|
WARP |
< 10 μm |
|
|
Cleaning / Packaging |
Class 100 cleanroom cleaning and vacuum packaging, |
|
|
25 pieces in one cassette packaging or single piece packaging. |
||
Note: Custom sapphire wafers with any orientation and any thickness can be provided.
Contact : Zhu Wind, +86 0391 393 3936
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of R-PLANE (1-102) SAPPHIRE WAFERS Search in a category : Electronics / Computers Search in a category : wafers, plane, sapphire |
971 Everything else / BulkReport abuse
Thursday, September 28, 2017
Quantity : as per ite - Price : based on Qty
Dear Sir, We deal with Building Materials & Machine Spares since 1987 and LED Lighting and Solar Products since 2014. Our Product Range : Structural Steel : MS Angles, Channel, Beams, Flat Bar, Plain sheets, Chequered plates,Round Bars. Aluminum: plain sheets, Angles, Flat Bars...
Rashid Essa Building Material Co. LLC
- sajj
- 971 - dubai
- 04 2563282
- 971 55 6995965
51310 Cosmetics and beautyReport abuse
Friday, April 26, 2024
Quantity : Customers - Price : Negotiable
Aerona Beauty carry a wide selection of Thinning Shears made from top quality Stainless steel AISI-440C & AISI-420. Each pair of Thinning Shears cuts with consistency and with a comfortably smooth action. These Scissors are Mirror Polished,Sand Finished and Satin Finished.Hair...
Aerona Beauty manufacturers of beauty care instruments
- aeronabeauty
- 51310 - Sialkot
- 923217106500
361002 Second hand goodsReport abuse
Friday, May 16, 2014
Quantity : 500000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406
