Equipment goods

QT-IN12-W Double Ring Infiltrometer

http://www.channeleco.com/en/
http://www.channeleco.com/en/Item/Show.asp?m=1&d=1208
Product description: Double ring infiltrometer is a simple device used to measure the rate of water infiltration into soil. Water infiltration rate is the water flows into a unit cross section of soil per unit time. It can be calculated by the measuring results and Darcy's law.
The standard device includes several sets of stainless steel rings with different diameter, which can deal with several measurements at the same time to get accurate and reliable results. When vertical water flows to the edge, the outer ring of the infiltrometer will play a role in isolation. The water in the inner ring flows vertically, thus the measurement only occurs in the inner ring. Press these two rings into the soil a few centimeters deep by shock absorbing hammer. Because the inner and outer rings are filled with water, the water actually infiltrates vertically from the inner ring into the soil. To achieve a good result, the following factors that may affect the measurement should be taken into account: surface vegetation, soil density, soil temperature and soil layers. The best measurement results are derived from on-site water holding capacity.
Application:
Geology, civil engineering, hydrology, forestry, environmental testing, hydrogeology, runoff, swamp protection, permeability testing, construction project etc.
Measuring standard:
The soil with infiltration rate within 1X10-2 cm/s or sandy soil with higher infiltration rates.
Features:
· Consist of two cylindrical buckets with the diameter of 30cm and 60cm.
· Made of durable stainless steel.
· Cross stainless steel tubes in the center to keep steady.
· Easy to press into soils
· Easy to operate with perpendicular steel handles
· Need to operate with Mariotte tubes
Technical Parameters:
Diameter of inner ring 30 cm
Volume of inner ring 3000 ml
Diameter of outer ring 60 cm
Volume of outer ring 10000 ml
Height of cylindrical buckets 50 cm
Material of cylindrical buckets High-quality stainless steel
Material of Mariotte Tubes PVC
Origin: China
http://www.channeleco.com/en/Item/Show.asp?m=1&d=1208
http://www.channeleco.com/en/

Location : 8/F., FLAT A-C, KWAI SHUN IND CTR., 51-63 CONTAINER PORT ROAD, HONG KONG, 100098 beijing,
Contact : kui kui, 86 010 62111044

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
QT-IN12-W Double Ring Infiltrometer

Search in a category : Equipment goods
Search in a category :
infiltrometer, double, ring, in12
A4 Papers for sale

Wednesday, February 01, 2017

Quantity : 500000 Ram

Our specification is as follows; Sheet Size: 210mm x 297mm, International Size A4 Quality: Imported 100% Virgin Wood Pulp Whiteness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min...

089376804793

  • 95000 - Betong
  • +66 9 09 13 80 57
Australia 6021 B2B Services
Recyclable stand up pouches

Wednesday, March 01, 2023

Recyclable stand up pouches Visually appealing Light weight and flexible High barriers, keeping your products fresher for longer Our recyclable resealable pouches are made from fully recyclable PE or PP material, providing a simple packaging solution that can save you money as well...

Myerton Packaging Pty Ltd

  • 6021 - Australia
  • 1300089850
Algeria 09000 Second hand goods
MISE EN VENTE D’UNE LIGNE D’IMPRESSION PAR TRANSFET D’EAU [WTP (WATER TRANSFER PRI...)

Thursday, May 30, 2024

Quantity : 1

Bonjour Madame ou Monsieur ; Nous mettons en vente une ligne d'impression par transfert d'eau en très bonne état. En effet, l'impression par transfert d'eau est un procédé qui permet d'imprimer des motifs sur des surfaces en 3D « trois dimensions ». Les supports d'application sont ...

ETS