Pulp Molded Package Production Line
Quantity : 100 units Price : USD18000-280000
Molded pulp, also named molded pulp or molded fiber, is a packaging material, typically made from recycled paperboard and/or newsprint. It is used for protective packaging or for food service trays and beverage carriers. Other typical uses are end caps, trays, plates, bowls, and clamshell containers.
For many applications, the molded pulp is less expensive than expanded polystyrene (EPS), vacuumed formed PET and PVC, corrugation, and foams.
Paper pulp molding machine is often considered a sustainable packaging equipment, it's packing material as defined by the Sustainable Packaging Coalition, since it is produced from recycled materials, and can be recycled again after its useful life-cycle. Molded pulp products can be made waterproof with a spray or dip coating of wax.
Pulp Molded Package Production Line Series
Manual Egg Tray Production Line
Automatic Egg Tray Production Line
Apple Tray Production Line
Manual Egg Carton Production Line
Automatic Egg Carton Production Line
Small Pulp Molding Production Line
Multi-Function Pulp Molding Production Line
Types of paper pulp moulding machine
Several types of molded pulp can be manufactured by several processes.
Thick-wall
These products usually have wall thicknesses of 1/16" to 1/4" and are used primarily for support packaging applications. Thick-Wall is also commonly referred to as "Slush Molded." The surfaces are very rough on one side and moderately smooth on the opposite side. Product definition is moderate due to the use of relatively inexpensive single-pass molds and the use of mixed recovered paper and kraft paper slurries. Typical uses are for edge and edge protector, heavy item packaging, auto replacement parts, molded pulp pallet trays etc.
Transfer Molded
A spray-molded vacuum-formed cup carrier. The open slits are formed during molding.
Transfer molded products are usually thin-walled, 1/16" to 3/16", and are the most prevalent type in use today. The process uses vacuum forming and take-off or transfer molds, where the mold is an extremely fine wire mesh in the shape of the upper/exposed surface. The fibrous slurries are frequently made up of a high percentage or entirely of recycled newspaper, which produces a relatively smooth surface on one side and a fairly smooth surface on the opposite side with good accuracy and definition.
Prior to the molding process, the mesh is mated with a vacuum chamber that draws water through the mesh into the chamber, with the mesh mold suspended above a liquid return pool. The fibrous slurry is sprayed from below onto the mold, and the vacuum draws the slurry tightly against the mesh, filling all gaps and spaces. When airflow through the mesh has been sufficiently blocked, the excess slurry falls into the return pool for recycling, and the mold advances onward to the drying process, following by separation of the mesh mold from the dried fiber plating.
Typical uses of transfer molded products are for packaging electronic equipment, cellular phones, and other household and hardware items. Very high-capacity, high-speed transfer molding equipment is used to produce drink trays, cup carriers,shippers, egg cartons, egg trays, pulp bedpan liners, pulp urinals, fruit trays, slipper pans, commode pans, end caps, etc.
Thermoformed Fiber
This newest form of molded pulp is the highest quality of thin-walled products available today. The process uses "Cure-In-The-Mold" technology which produces well defined, smooth surfaced molded pulp products. After being formed, the product is captured in heated forming molds which presses and densifies the molded products. They are accurately formed and have the appearance of the plastic material. The products are ejected from the heated molds in their finished state as opposed to being dried in a heated oven. Typical uses for this type are for point-of-purchase packaging and those applications where high definition and appearance are of prime importance.
Processed
This type of molded pulp product is that which has undergone some kind of secondary processing which is generally different from or in addition to, the basic production procedure. This could apply to any of the first three types. Secondary processing could be coating, printing, hot-pressing, die-cutting, trimming or manufactured using colors or special slurry additives. Uses are for many kinds of custom applications.
Contact : Du Darryl, +86 0535 8573288
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Pulp Molded Package Production Line Search in a category : Equipment goods Search in a category : pulp, package, molded, production |
Wednesday, February 17, 2016
Quantity : 3000MT - Price : $350/MT/CIF
Product Details: Product: Green Asparagus Color: Fresh green Standard: Grade A Size: Length: 15cm Dia: 8-10mm/10-16mm/16-22mm Length: 17cm Dia: 8-10mm/10-16mm/16-22mm Or cut according to custome's requirements Package: 1kg/bag 10kg/carton or according to custome's requirements MOQ...
KHUN JACK PARTNERSHIP LIMITED
- 50000 - CHIANG MAI
- +66 9 56 19 49 81
Thursday, December 19, 2024
Quantity : 10000 - Price : 5€
Silicone Sucker Waterproof Bluetooth Speaker Material: Silicone gel USB Cable Length: about 76cm Item Dimension: about 62 x 62 x 61 mm Package Dimension: about 211 x 175 x 51 mm Parameters: 1. Buttons/Interfaces: ON/OFF Button, Micro USB Interface, play/pause, Next and Previous...
MaciMax intelligent téléphone accessoires grossiste
- hjb810410
- 13004 - Marseille
- 04 91 92 53 77
Saturday, February 20, 2016
Quantity : 1000 MT PE - Price : 400 usd per mt CIF
Specifications Green mung beans 1.Admixture: Max.0.5% 2.Moisture: Max.14% 3.Imperfect Rate: Max.3% 4.Size: 3.0mm/ 3.4mm,/3.8mm/4.0mm Green Mung Bean Green Mung Bean Moisture Max 14% Admixtur Max 0.5% Imperfect Rate Max 3% Size 3.0mm/3.4mm,3.8mm/4.0mm Place...
Khun Jack Partnership Ltd
- 5000 - Chaing Mai
- +66 9 68 75 20 43