PU8635 No Smell Polyurethane Sealant for Windshield Replacement

PU8635 No Smell Polyurethane Sealant for Windshield Replacement

PU8635 is one component polyurethane adhesive used in windshield bonding and sealing.

Key Features

1. No volatile odor, no smell after applying of the car
2. Excellent extrudability, good shape retention, easy application
3. Fine and smooth appearance, no impurity particles
4. With proper hardness, easy for secondary maintenance
5. Excellent adhesion and wear-resisting property
6. No bubbles after cured
7. No sag or flow phenomena within 30mm perpends

Typical Applications
Mainly use for automotive windshield and side glass replacement in after-market.

Technical Data Table

Note: All data above were tested under special condition; storage condition has a direct impact to the products' shelf life.

Directions for Use

Tool: Manual or pneumatic plunger caulking gun

Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.

For cartridge
1. Cut nozzle to give the required angle and bead size
2. Pierce the membrane at the top of the cartridge and screw on the nozzle
3. Place the cartridge in an applicator gun and squeeze the trigger with equal strength

For sausage
1. Clip the end of the sausage and place in barrel gun
2. Screw end cap and nozzle on to barrel gun
3. Using the trigger extrude the sealant with equal strength

Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately.

Package & Storage

310ml cartridge, 400ml/600ml sausage, 20pcs/box, 2 boxes/carton. 240kg/ drum

*When stored at 5~25°C, humidity≤50%RH in the original unopened containers, this product has a usable life of 9 months from the date of production. Sampling test for products which exceed shelf life before taking use.