Precautions Before Operating The Bottle-Top Dispenser
Please read following instructions carefully before the operation in case of any danger or degraded performance of bottle-top dispenser.
Operation procedures
1. Insert both inlet and outlet and then tighten screws;
2. Remove cap and place it under outlet pipe;
3. Turn knob to intended scale marking;
4. Lift piston to a certain height and press it down; repeat this operation until all air bubbles are discharged;
5. If step 4 fails, check whether pipette and other valves are properly mounted;
6. Lift piston to the highest position of travel, and then press it down to the lowest position of travel;
7. After use, press piston down to the lowest position of travel and then lock the bottle-top dispenser.
Precautions
1. Insert inlet and outlet gently to prevent any damage;
2. Tighten valves properly before use to prevent splashing during piston movement;
3. Make piston move slowly at a constant space during dispensing;
4. Stop operation immediately in the case of any failure to prevent further damage to dispenser;
5. Recover cap of outlet pipeline after use to prevent residual liquid dropping down;
6. Turn the knob to 0 after use for safety consideration;
7. Use dispenser within the allowable working temperature range.
Contact : Bruce Lu, +86 29 89284429
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Precautions Before Operating The Bottle-Top Dispenser Search in a category : Everything else / Bulk Search in a category : precautions, dispenser, bottle, operating |
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Tuesday, September 08, 2015
Module parameters HD-960P-38*38mm 1.3megapxel low-illumination HD web camera Network Camera - Sensor type 1/4 inch、1.3megapixel , CMOS low-illumination width dynamic sensor - Minimum illumination Color: 1 Lux/F1.2, black and white: 0.02Lux/F1.2 - Electronic shutter 1/5 second ~ 1/50...
ZT Technology Group Ltd.
- ellazhan
- 852 - Fo Tan
- +85 2 26 75 75 58
Friday, December 15, 2017
OEM PART NO DESCRİPİTİON 66072 Crown Wheel and Pinion FOR CARRARO 13X30 66941 Crown Wheel and Pinion 15x37 2277448 CATERPİLLAR AİR FİLTER OUTER 2277449 CATERPİLLAR AİR FİLTER İNNER 01/117901 FAN BELT 01/124403 FAN BELT 01/124404 02/100073 Oil Filter Canister Type, MEDİUM MODEL 02/100284...
ANAC MAKINA CO LTD STI
- 34800 - İSTANBUL
- +905069691531
- +9005069691531





