Algomtl
 
PDC DRAG BIT
Details
China Shoes and leather
Shoes and leather

PDC DRAG BIT

The PDC drilling drag bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the scraper bit with welded scraper blade and water divider cap, which is made of medium carbon steel. The lower end is welded with scraper blade and water dividing cap, and the upper end is connected to the drill column with a wire fastener. The drag blade, also called the blade wing, is the main working part of the scraper bit.

PDC Drag bit are suitable for drilling in soft to soft soils and plastic and brittle formations such as mudstone, muddy sandstone, shale, etc. SML's Drag bits are generally produced in customized styles, mostly based on customer drawings and size requirements.

Features Of PDC Drag Bit
PDC Drag Bit are suitable for soft and cohesive formations. Scraper bits break rock by cutting. When a scraper bit works in a soft plastic formation, the cutting process is similar to that of a knife cutting soft metals. The blade eats into the formation under drilling pressure, while the rock in front of the cutting edge is continuously flowing plastically under torsional force, and the rock at the bottom of the well is stripped up in layers.
Advantages Of SML PDC Drag Bit
Professional customization: senior designers design corresponding drawings according to customer needs to meet customer demands.
Extra large water hole design is conducive to water intake and slag discharge, increasing drilling efficiency.
PDC Drag Bit adopts the principle of equal cutting volume to lay the teeth, which makes the bit wear more evenly and prolongs the bit life to the maximum;
The PDC Drag Bit adopts the hydraulic structure of blade wing combined with water eye and flow channel, so that the bit can be cleaned timely, avoiding the repeated breaking of rock chips and giving full play to the cutting efficiency of the bit.
In terms of manufacturing process, we have researched and developed medium frequency induction low temperature brazing technology and PDC drill bit mold forming technology to ensure the manufacturing quality of the drill bit.
Drag Bit has wide adaptability to the formation and can be used for drilling in soft to medium-hard (2-6.5 grade) non-abrasive formations.

If you are looking for a reliable drill bit factory, don't hesitate to contact us!

Location : No. 009-12F, D2 Software New TownHuacheng Avenue, East Lake Development ZoneWuhan, 430076 ZoneWuhan,
Contact : smlpdcbit smlpdcbit, 0086 27 63492900

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
PDC DRAG BIT

Search in a category : Shoes and leather
Search in a category :
drag
Spain 28970 Equipment goods
Potato cutter spiral cutting plane model is designed for cutting potato chips

Tuesday, February 17, 2026

Quantity : 1

Potato cutter spiral cutting plane model is designed for cutting potato chips, cut water and savored, is a cutter with adjustable cutting easy handling. - Funcicion built in aluminum and stainless steel. Potatoes cutter - Easy adjustment and blade change. - Input and output...

Mafrigarlo

China 523220 Stock lots
Encapsulated adhesive for electronic equipment

Sunday, February 28, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Guangzhou Usilicone Chemical Technology Co.,Ltd

  • 523220 - Guangzhou
  • +086 0769 88888312
France 42952 Second hand goods
Roland R 304 HOB-E+LV - Year 1999

Saturday, November 15, 2014

As owner, we have for sale : * Man-Roland R 304 HOB+LV (P), Year 1999 53x74 - 4 Colors + Coating Tower with Anilox "Chambered Doctor Blade" + Extended Delivery Equipped with: RCI 2 Console CCI with ColorPilot Grapho Metronic CPL (Semi-Automatic Plate Change) Automatic Paper...

ACS DIFFUSION s.a.s.

  • acsdiffusionsa
  • 42952 - Saint-Etienne
  • 0033 (0)4 77 92 77 88
  • 06 10 63 37 83
 
Secure payment

Information

Top search