PCD & PCBN
Quantity : 8000kgs Price : USD0.025 - USD1.05
E-Grind supplies the whole range of PCD blanks and PCDN blanks for cutting tool purpose. The largest Diameter of material PCD and PCDN material blanks available can be 55mm. Our PCD cutting tool blanks and PCDN blanks provide high wearing resistance ability and high finishing surface.
Application of PCD Metal Blanks
Our plant installs laser cutting machines and surface lapping and finishing machines to provide full service for PCD. With advanced inspecting machines of SEM, C-SCAN, X-Ray Diffractometer etc. Our plant applies strict Quality Control process.
Non-ferrous metals and alloys: Aluminum/gray iron composite, copper, Aluminum...
Nonmetallic materials: ceramics, plastic, rubber, chipboard...
PCD disc
Product |
Diamond Content (Vol%) |
Product Properties |
Application |
ET02 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, precious metals, etc. |
ET05 |
≥92 |
Very good electrical discharge machining, general life, better heat resistance and impact resistance. |
Superfinishing, excellent surface processing quality for copper, bronze, aluminum, magnesium, magnesium aluminum alloy, plastic, plexiglass, etc. |
ET10 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Fine machining, very good surface processing quality, for aluminum alloy (Si content<12%), copper alloy, composite wood processing, high-precision wear-resistant corbelled device, etc. |
ET25 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
ET35 |
≥95 |
Good electrical discharge machining, very long life, good heat resistance and impact resistance. |
Used for resin, composite materials, fiber reinforced plastics, high density reinforced board, silicon aluminum alloy and other high wear-resistant materials. |
ET302 |
≥95 |
Good electrical discharge machining, long life, better heat resistance and impact resistance. |
Used for composite, laminate flooring, nonmetal hard and brittle materials, carbide alloy, graphite and graphite composites, aluminum silicon alloy (Si content>12%), the other high wear-resistant materials, such as ceramics, carbide, etc. |
Available specification
Grain size |
Application |
Grade |
Diameter |
Total thickness |
DIamond table thickness |
Woodworking |
Metalworking |
Conductive |
0.85μm |
Ultra-fine micron structure for excellent surface finish requirements, |
ET085 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
|||
2μm |
For good surface finishing |
ET02 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
|
|
√ |
|||
5μm |
ET05 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
10μm |
General purpose, balance cutting efficiency and life |
ET10 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
25μm |
Good wear resistance production,for high Si% Al alloy. |
ET25 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
302μm |
ET302 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
√ |
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|||
35μm |
ET35 |
45 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
√ |
|
|
55 |
1.6/2.0/3.2 |
0.5±0.15 |
√ |
|
|
PCBN (Polycrystalline Cubic Boron Nitride)
PCBN consists of CBN and Binder. It is produced in high pressure and high temperature. It has excellent performance in hardness, wearing resistance, thermal stability.
Application: for hard ferrous materials (hardened steel, cast iron, high-temperature alloy, HSS, Powder metallurgy metals, Ni-Cr alloy...
E-Grind provides two series of PCBN:
1) Solid CBN
2) CBN with Tungsten Carbide supporting.
PCBN and SBN Grade
Grade |
CBN grit (μm) |
CBN content (Vol%) |
Processing way |
Application |
SBN95Z1 PCBN95Z1 |
20、30 |
0.95 |
Continuous cutting with large stock removal |
For Rough processing Grey Cast Iron, Chilled Cast Iron, Powder Sintered Alloy. |
SBN90Z PCBN90Z |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For Rough process and semi-finishing processing the wear resistant cast iron, nodular cast iron etc. |
SBN90Z2 PCBN90Z2 |
10、15 |
0.9 |
Continuous cutting with large stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN80G |
3、5 |
0.8 |
Continuous cutting with Medium stock removal |
For rough processing and semi-processing alloy cast iron, high nickel Chrome, high chrome iron and chilled steel with hardness HRC45-50. |
SBN70G PCBN70G |
3、5 |
0.7 |
Continuous cutting with small stock removal |
For finishing the chilled steel and high temperature alloy with HRC45-55. |
SBN60G |
1、3 |
0.6 |
Continuous cutting with small stock removal |
For finishing and super-finishing the chilled steel with HRC55-62 like bearing steel, tool steel, mold steel, gauge steel and HSS. |
SBN55G1 PCBN55G1 |
1、3 |
0.55 |
Slight non-continuous and continuous cutting with small stock removal |
For Finishing and super-finishing the chilled steel with HRC55-65, like bearing steel, tool steel, mold steel, gauge steel and HSS. |
If you want to know more kinds of PCD products and PCDN cutting tools, please visit our website.
E-Grind offers a full range of superabrasives, diamond and CBN powder, as well as a variety of superhard materials products to meet the needs of a wide range of industries.
Now the price of diamond dies is reasonable, anything you need, please contact us.
Contact : Liu Locke, 0371 68616868
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of PCD & PCBN Search in a category : B2B Services Search in a category : pcbn |
Tuesday, July 10, 2007
Quantity : 2000 Tons
we sell diferents grains of high cuality : Quinoa, Cañahua ,Amaranth, Maca and his derivates like pops, flakes, fluor.Location : Urbanizacion"Los Pinos" Zona Norte, none Oruro, Contact : Jean-marie Galliath, +59 1 25 28 51 88
SONAPTO S.R.L.
- sonapto
- none - Oruro
- +59 1 25 28 51 88
- +59 1 70 42 43 19
Saturday, June 27, 2015
The 3S series high-pressure reciprocating triplex pump is mainly used in oil exploration and refinery, petrochemical, food, pharmaceutical and other light industries whereas transportation of oil, sewage, chemical and water under pressure is required. Location : ROOM 26, 5/F, THRIVING...
Maxfully International Equipment Ltd.
- 852 - TSUEN WAN
- +85 2 31 63 23 45
Friday, August 27, 2010
Quantity : by contain - Price : various
We export various high quality Japanese food and beverages, from frozen vegetables, canned food, to gree tea, coffee, and sake. Please visit our website and we are very happy that we can offer various business chances to you.Location : 1-6-8, Koyocho-naka, Higashinada-ku,, 658-0032 Kobe...
Crystal Group Co., Ltd.
- junkojat
- 658-0032 - Kobe, Hyogo
- +81 7 88 42 92 20
- 81 90 8750 1804