Palm Oil Wastewater
Price : USD 150- 600
Palm oil is not only the highest yielding cheap vegetable oil on the earth but also a safe raw material for edible oils and daily chemicals, and a raw material for biofuel.
As a raw material for edible vegetable oils, chemical raw materials and biofuel, palm oil has attracted worldwide attention in the process of ecological protection and industrial pollution. As a result, palm oil wastewater treatment also receives much attention.
Palm oil mill effluent (POME)is a yellow liquid with a unique unpleasant smell and comes from oil extraction, cleaning and washing process in the POME factory, which is featured with very high COD and BOD.
Due to its acidic nature (pH 3.4–5.2), high salt and suspended solids, oil and grease, the untreated discharge of POME can result in considerable environmental consequences.
Each ton of palm oil produced emits about 20 tons of high-concentration organic wastewater. When the high-concentration organic wastewater per ton is treated according to the current sewage pond treatment method, it is equivalent to emitting more than 210 million tons of carbon dioxide gas into the atmosphere every year. It's important to solve the problems in palm oil wastewater treatment.
To achieve environmental requirements and economic challenges, the POME factories are trying to get efficient and return on the investment process.
JIUWU HI-TECH has made a lot of studies and many rich experiences for POME treatment since 2012.
JIUWU HI-TECH offers the solution for POME treatment with an integrated ceramic membrane technology which is a green, friendly environment, economic efficiency and has the following technical benefits:
No discharge of wastewater
Low capital investment ;
Low operation cost;
Oil is concentrated and water is recycled
After integrated process filtration, concentrate including surplus sludge from anaerobic and centrifuge is used as fertilizer for cattle farm and purified water can be used for recycling or the bolier feed water due to salts and organic compounds are removed.
If you want to find a reliable ceramic membrane factory, please choose us, and we will be your best partner.
Contact : Ding Claire, 025 58109595
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Palm Oil Wastewater Search in a category : Everything else / Bulk Search in a category : wastewater, palm |
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Wednesday, September 14, 2016
Quantity : 5000 - Price : 100,00 €
Bellows Seal Stop Valves (Angle Type) DIN Angle Type Bellows Sealed Stop Valve DIN Bellows Seal Globe Valve DIN Faltenbalgventil Eckform DIN Válvulas de fuelle(Paso angular.) DIN ventil uzavírací s vlnovcem rohový DIN Standard seteventil med belg (Vinkel modell) DIN Standardında...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935