OPS-30 Optical CNC Probe System
Harbin Pioneer M&E Technical Development Co, Ltd was founded by Mr. Baichun Sun in 1995. After several years of development, the company gradually focused its main business on developing CNC probe and touch probe. its production, and sales.We developed probes, tool setters, and a variety of probe styluses of the three series of products. As the first probe factory in the field of CNC machine tool probe in China, Pioneer has always persisted in independent development pioneer machine and tool and worked hard to reach the world advanced level.
OPS-30 optical probe system contains OP510 optical probing, OSI-20 receiver and standard measuring software. The OP510 is a compact 3D touch-trigger probe with optical transmission probe that is used for workpiece measuring. OPS-30 optical probe system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on. We also provide infrared probe.
Parameter of OPS-30 Optical CNC Probe System
|
OP510： |
|
|
|
Measuring direction |
±X，±Y，+Z |
|
|
Arbitrary direction swinging angle |
X-Y±12°, Z +5 mm |
|
|
Repeatability （2σ） |
≤ 2 μm； |
|
|
Trigger force in Z direction |
600±30（g） |
|
|
Trigger force in X-Y direction |
40-80g） |
|
|
Optical signal receiving/sending distance |
>5m |
|
|
Model of the standard stylus |
M4-P50-RB6-S36 |
|
|
Model of the battery |
14250，3.6 (V), 2 Pcs |
|
|
Seal grade |
IP68 |
|
|
OSI-20： |
|
|
|
Optical signal receiving/sending distance |
>5m |
|
|
Input voltage |
24±10% VDC |
|
|
Output load current |
50mA |
|
|
Length of the cable |
8m |
|
|
Length of the cable retaining tube |
2m |
|
|
Seal grade |
IP68 |
|
Contact : eer Pion, 0451 82285451
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of OPS-30 Optical CNC Probe System Search in a category : B2B Services Search in a category : system, optical, probe |
28492 Construction goodsReport abuse
Monday, August 20, 2012
Quantity : une machin - Price : 30000euros
Location : Calle Prado Isidro 45 , 28492 Mataelpino Madrid, Contact : Allami Azizi cherifa, 639509955
autonomo
- 28492 - Mataelpino Madrid
- 639509955
5099 Feasts itemsReport abuse
Sunday, December 15, 2024
Quantity : 50000 - Price : dépend du quantité
High quality, pleasant to the touch, light, soft, Ultra-absorbante and dry fast: your Fouta will follow you around, in your bathroom, at the pool, at the beach, on the transat, the boat or pareo, surrounding the babies, the children out of the bath. In your carry-on baggage or...
artisanat Tunisien
- med.SGHAIER
- 5099 - Tunisia,Monastire
- +21 6 26 10 49 12
- 26104912
999077 Equipment goodsReport abuse
Thursday, December 19, 2024
Unitronics OPLC Jazz – Automate Control Engineering Ltd. (winston@automate-ace.com) Jazz : micro PLC with text-based HMI Replace that “smart relay” with a real PLC—for the same low price. Jazz is a full-function Programmable Logic Controller with onboard I/Os and a built-in Operator Panel...
Automate Control Engineering Ltd.
- automatehk
- 999077 - Hong Kong
- +85 2 23 42 72 76
