Equipment goods

Nd:YAG

Quantity : 999

Nd: YAG (neodymium-doped yttrium aluminium garnet; Nd: Y3Al5O12) is a crystal that is used as a lasing medium for solid-state lasers. The dopant, triply ionized neodymium, typically replaces yttrium in the crystal structure of the yttrium aluminium garnet (YAG), since they are of similar size. Generally the crystalline host is doped with around 1% neodymium by atomic percent.
Features:
• High Gain, Low Threshold, High Efficiency;
• Low Loss at 1.06 mm, High Optical Quality;
• Good Mechanical and Thermal Properties;
• Due to the cubic symmetry and high quality, Nd: YAG is easy to operate with TEM00 Mode.
Applications:
• Nd: YAG can produce blue laser with the frequency-doubling of 946nm;
• Nd: YAG can be operated in a very high power laser up to kw level at 1064nm;
• Nd: YAG can be Q-switched with Cr4+YAG directly;
• Nd: YAG can be used for high power green laser for SHG@1064nm.
Optical Properties:
Stimulated Emission Cross Section
2.8x10-19 cm2
Relaxation Time of Terminal Lasing Level
30 ns
Radiative Lifetime
550 us
Spontaneous Fluorescence Lifetime
230 us
Linewidth
0.6 nm
Pump Wavelength
807.5nm
Absorption Bandwidth
1nm
Polarized Emission
Unpolarized
Thermal Birefringence
High
Loss Coefficient
0.003 cm-1 @ 1064nm
Specifications:
Doping (atm%)
0.2%~ 2.5%
Orientation
<111> crystalline direction
Wavefront Distortion
λ/8 per inch @ 633 nm
Extinction Ratio
>28dB
Dimension Tolerances
Dia.: +/-0.025 mm , Length: +/-0.5 mm
Surface Quality
10/5 Scratch / Digper MIL-O-1380A
Parallelism
< 10 arc seconds
Perpendicularity
< 5 arc minutes
Clear Aperture
>90%
Flatness
<λ/10 @ 633 nm</div>
Chamfer
<0.1 mm @ 45deg</div>
Barrel Finish
50-80 micro-inch (RMS) ,
Anti-Reflection Coating
R < 0.20% @ 1064 nm per surface. Damage threshold over 1GW/cm2@ 1064nm, 10 ns and 10 HZ
High-Reflection Coating
Standard HR coating with R>99.8% @ 1064nm and R<5% @ 808nm</div>

Location : 118 Yangqiao Road West,Fuzhou,350002,P.R.China, china fujian ,
Contact : amiee ye,

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Nd:YAG

Search in a category : Equipment goods
Search in a category :
France 201615 Raw materials
TTA500: N,N-Diglycidyl-4-Glycidyloxyaniline Cas 5026-74-4

Wednesday, November 08, 2023

Quantity : 9000tons - Price : $12~15/kg

As a typical special glycidyl amine epoxy resin, TTA500 cas 5026-74-4 has the characteristics of low viscosity, low shrinkage, and high-temperature resistance. Its molecular structure contains three epoxy groups and a heat-resistant benzene ring, thus, the cured product has high crosslinking...

Jiangsu Tetra New Material Technology Co., Ltd.

  • 201615 - Songjiang
  • 0086 2154265697
TTA27: 1,2:5,6-Diepoxyhexahydro-4,7-methanoindan Cas 81-21-0

Friday, May 31, 2024

Price : $12~15/kg

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Jiangsu Tetra New Material Technology Co., Ltd.

  • 201615 - Songjiang
  • 0086 2154265697
Indonesia 90125 Electronics / Computers
Genuine Printhead Kyocera KJ4A-RH UV Inkjet

Saturday, December 19, 2020

Quantity : 1 - Price : $ 1920

Genuine Printhead Kyocera KJ4A-RH UV Inkjet This new generation Kyocera KJ4A-RH is designed for high speed single-pass and multi-pass applications with printers using UV ink.The Kyocera KJ4A-RH is equipped with internal filters that eliminate foreign objects in ink and an internal...

Printpartin

  • 90125 - Makassar
  • +62 4 11 43 75 03