Equipment goods

METAL HEMMING

Metal hemming is a process that involves folding the edge of the sheet metal to 180° onto itself. Then, two newly formed layers are flush with each other. Many automotive parts are produced by metal hemming, such as trunk lids, deck lids, hoods, tailgates and doors. There are 4 types of metal hemming: teardrop hem, closed hem, open hem and rolled hem. The closed hem is the most popular one as the process is simple. It is totally flush. However, it has material limitations, including thickness and angle limitations to avoid fracture.

WHAT IS THE PURPOSE OF METAL HEMMING?

Generally, metal forming is used to connect parts together to achieve a better appearance and strengthen the edges of parts.

HOW TO HEM MATERIAL WITH LOW FLEXIBILITY?

For some material such as aluminum, the closed hem is not an ideal choice, since the flexibility them are not enough and they are easy to break during the process. Instead, teardrop hem is the best choice for this material. It is a flange which is bent over more than 180° with only marginal inside radius change, and that is the reason why it can process that low-ductility without fracture.

WHAT IS THE DIFFERENCE BETWEEN METAL HEMMING AND METAL SEAMING?

Hemming and seaming are two very similar metalworking processing that both involve bending metal over onto itself. The difference is that seaming is to use a seam to join two layers of metal sheet together and two layers are not flush with each other while on the other hand two layers are flush with each other with hemming.

If you need any kinds of metal work fabrication, please contact us, as a professional fabrication work company, Hongkun is willing to offer you high quality products.

Location : No.11-1, Yecun Road, Sanshan District, Wuhu City, Anhui Province, China., 241080 hunkmachining,
Contact : com hunkmachining, 0553 2861635

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
METAL HEMMING

Search in a category : Equipment goods
Search in a category :
metal, hemming
Toupees.wigs,hair extensions! go to Qingdao Shunfa Hair Products Co., Ltd.

Wednesday, August 13, 2014

Quantity : 10000piece - Price : USD50-200

- Shunfa hair TOUPEE; - with different base design,lace,mono,poly,fish net,etc 1. 100% human remy/virgin hair, no other hair mix 2. No shedding, tangle free ; after wash, not knot and curls holden 3. Natural hairline 4. No chemical process, full cuticle aligned, could be dyed ...

Qingdao Shunfa Hair Products Co., Ltd.

  • 0086 - Qingdao
  • 0086 532 58828026
  • 0086 18764202839
Turkey 34510 Raw materials
photo not available

Thursday, June 16, 2016

Application Method 1. Glue is applied on textile or leather. 2. Patterned or fully coated glue is fixed by heat before foil transfer properly. 3. Stamping the foil ,heat: 130C-150C, pressure 4-6 bar, touch time 3-5 s. 4. Discard the carrier film after stamping process.Different...

France 59590 B2B Services
ETM DIN GATE VALVE

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935