Equipment goods

METAL FLANGING

Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It is included in the forming process of stamping.

WHAT IS THE ADVANTAGE OF METAL FLANGING?

It can process precision stamping parts with complex shape and good rigidity.

Improve the production efficiency. Save dies for some deep drawing parts. Reduce the manufacturing cost.

It can replace the deep drawing work of a complex shape workpiece, so flanging is especially suitable for small batch trial production.

Flanging is usually applied at the edge of the stamping part, which can effectively save the material.

WHAT SHOULD BE CONCERNED IN METAL FLAGGING?

1. The flanging degree of inner hole of stamping parts shall not be too large at one time.

Flanging is a stamping method that turns the workpiece with holes punched in advance into vertical flange along the hole edge. The deformation of hole flanging is from the tensile deformation of the material along the tangential direction, and the closer to the edges, the greater the deformation and the flanged area of workpiece gets thinner. Due to that, the hole edge may be cracked if not dealt properly. In order to prevent the cracking, the flanging degree of the inner hole of the workpiece must not be too large. If the flanging height is large, we can process flanging several times instead.

2. The flanging coefficient of punching flanging shall not be too small.

In flanging, the deformation degree is expressed by cofficient "K", which is the ratio of the aperture before flanging to the aperture after flanging. Obviously, the larger the value of K, the smaller the degree of deformation. On contrary, the smaller the value of K, the greater the degree of deformation, and more likely the edge of the flanging hole will be broken. The minimum value of K occurs with the maximum deformation degree which can be achieved without cracking the hole edge.

In order to prevent edge cracking, K shall not be too small and shall be greater than the minimum value introduced above. Experience shows that the minimum value of K is not only related to the type and performance of the material, but also to the relative thickness of the blank, and the shape of the product.

If you need any kinds of metal work fabrication, please contact us, as a professional metalworking factory, Hongkun is willing to offer you high quality products.

Location : No.11-1, Yecun Road, Sanshan District, Wuhu City, Anhui Province, China., 241080 hunkmachining,
Contact : com hunkmachining, 0553 2861635

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
METAL FLANGING

Search in a category : Equipment goods
Search in a category :
metal, flanging
Thailand 10500 Phones
Samsung Galaxy Note II Android 4.1

Monday, March 04, 2013

Quantity : 30 - Price : $425.00

Samsung Galaxy Note II It's a phablet… phone cum tablet. The Note II is an ultimate Smartphone with the latest features and specifications to enthrall any tech savvy person. Specifications: Basic Information Model N7100 2G:GSM 850/900/1800/1900 3G:WCDMA 850/900/1900/2100MHz Sim Card...

Mobiworld

France 051530 Raw materials
Glycine

Friday, February 06, 2015

1.The food-grade Glycine is mainly used as nutritional supplement and food additive:      It is used as a flavoring or sweetness because it is sweet. In combination with sodium glutamate, DL-alanine, or citric acid, it can be used in ic beverage; as a acid corrector or buffer for...

Zhaocounty Granray Bioproducts Co.,Ltd

  • 051530 - NanBaiShe
  • 8631180826581
Thailand 50000 Food
New Products 2016 Dried Apricot,Dried Peach and Green Raisin

Tuesday, February 16, 2016

Quantity : 1000 - Price : 1500 USD/ MT CIF

We are a professional manufacture and exporter of dried apricot, raisin and goji berry, we can supply you dried apricot, brown raisin, golden raisin, green raisin and goji berry with high quality and competitive prices. We can do small pack and bulk pack as buyers' requirements,...

KHUN JACK PARTNERSHIP LIMITED

  • 50000 - CHIANG MAI
  • +66 9 56 19 49 81