Stock lots

METAL FLANGING

Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It is included in the forming process of stamping.

WHAT IS THE ADVANTAGE OF METAL FLANGING?

It can process precision stamping parts with complex shape and good rigidity.

Improve the production efficiency. Save dies for some deep drawing parts. Reduce the manufacturing cost.

It can replace the deep drawing work of a complex shape workpiece, so flanging is especially suitable for small batch trial production.

Flanging is usually applied at the edge of the stamping part, which can effectively save the material.

WHAT SHOULD BE CONCERNED IN METAL FLAGGING?

1. The flanging degree of inner hole of stamping parts shall not be too large at one time.

Flanging is a stamping method that turns the workpiece with holes punched in advance into vertical flange along the hole edge. The deformation of hole flanging is from the tensile deformation of the material along the tangential direction, and the closer to the edges, the greater the deformation and the flanged area of workpiece gets thinner. Due to that, the hole edge may be cracked if not dealt properly. In order to prevent the cracking, the flanging degree of the inner hole of the workpiece must not be too large. If the flanging height is large, we can process flanging several times instead.

2. The flanging coefficient of punching flanging shall not be too small.

In flanging, the deformation degree is expressed by cofficient "K", which is the ratio of the aperture before flanging to the aperture after flanging. Obviously, the larger the value of K, the smaller the degree of deformation. On contrary, the smaller the value of K, the greater the degree of deformation, and more likely the edge of the flanging hole will be broken. The minimum value of K occurs with the maximum deformation degree which can be achieved without cracking the hole edge.

In order to prevent edge cracking, K shall not be too small and shall be greater than the minimum value introduced above. Experience shows that the minimum value of K is not only related to the type and performance of the material, but also to the relative thickness of the blank, and the shape of the product.

As a metalworking factory, we can offer sorts of metal work fabrication for sale, if you are interested, please leave us a message.

Location : No.11-1, Yecun Road, Sanshan District, Wuhu City, Anhui Province, China., 241080 hunkmachining,
Contact : com hunkmachining, 0553 2861635

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
METAL FLANGING

Search in a category : Stock lots
Search in a category :
flanging, metal
France 17110 Craft
SANZAS CARIMBAS

Monday, March 25, 2013

Quantity : 12 - Price : 62,00 €

Importer or sell lots sanzas carimbas: 12 cm diameter metal keys face exotic wood bottom half coconut. Very good sound. Sold in packs of 25 pieces: 62,50 € the lot is 2,50 € per piece. Minimum purchase a lot. If this proposal please, just send me an e-mail confirmation stating the...

OUTRE MERS

  • outremers
  • 17110 - SAINT GEORGES DE DIDONNE
  • +33 6 81 16 68 53
Taiwan 23511 Audio and Video
CMX-12 high definition HD/SD digital AV Mixer

Thursday, February 06, 2025

Applications : CMX-12 is a high definition digital AV Mixer, which is a simple type of HD/SD Video Mixer Editor to switch and effects. Each input BUS supports 6 inputs (2 x HDMI, 2 x Component, 2 x S-Video and Composite video) and also Background Color for special effect. The output...

Meicheng Audio Video Co., Ltd.

  • meicheng
  • 23511 - New Taipei City
  • 886 2 82280311
France 510510 B2B Services
Polyester lanyard

Thursday, May 05, 2016

Model: SB-062 Name: Polyester lanyard Customize: Width, Logo Material: Polyester(rope), Metal(hook) Size: 2cm*90cm Weight: Hemming process: Sewing Hook type: Lobster hook Color: Black Printing: Screen print Product description: http://www.scivas.cn/Lanyard/polyester...

Shenzhen Mingjia Smart Card CO., LTD

  • 510510 - Guangzhou
  • 0086 20 85246124