China Medical
Medical

Medical Latex Exam Gloves disposable Grade

Quantity : 1650ctns

Latex examination gloves non-sterile.
1.Power or power free,to satisfy different users practice.
2.Material: 100% nature latex,made of high quality medical grade latex.
3.textured and smooth surface, to fit different medical devices.
4.4mil or other,adequate thickness, not effect on doctors hand sensitivity.
5.the size meet international standard,fits either hand.
6.package can be according to the customer's request
7.beaded cuff.ambidextrous,good ductility and stretchability.
8.good quality and lowest price
9.Storage: The gloves shall maintain their properties,when stored in a dry condition at temperature not higher than 30℃。
10.Shelf-life: 5 years from the date of manufacturing.
Applications: AQL: 1.5-4.0 ,Medical,Industrial and Food Check.
1.Protection from unwanted or dangerous substances.
2.Easy donning and helps prevent roll back.
3.Softness provides superior comfort and natural fit
4.Beaded cuff makes donning easy.
5.Ambidextrous and straight fingers.
Specifications:
1.Product Specifications
Type Powdered and non-sterile.
Material Natural high.
Design & Features Ambidextrous; smooth or fully textured surface; beaded cuff; natural white, coloured (blue/green) or mint flavoured.
Powder Absorbable cornstarch USP Grade.
Storage The gloves shall maintain their properties when stored in a dry condition at temperature not higher than 30°C.
Moisture Content below 0.8% per glove.
Shelf-life 5 years from the date of manufacturing.
Type Powder-free (On-line chlorinated / Polymer-bonded / Double chlorination) and non-sterile.
Material Natural high quality latex.
Design & Features Ambidextrous; smooth or fully textured; beaded cuff; off-white to yellow.
Storage The gloves shall maintain their properties when stored in a dry condition at temperature not higher than 30°C.
Moisture Content below 0.8% per glove.
Shelf-life 5 years from date of manufacturing.
2.Physical Dimensions
Dimensions Standards
I Glove ASTM D3578 (05)
Length (mm) 240 min 220 min (size XS, S)
230 min (size M, L, XL)
Width (mm)
• Extra-small 76 ± 3 70 ± 10
• Small 84 ± 3 80 ± 10
• Medium 94 ± 3 95 ± 10
• Large 105 ± 3 111 ± 10
• Extra-large 113 ± 3

Thickness - single wall (mm)
• Fingers 0.12 ± 0.03 0.08 min
• Palm 0.11 ± 0.03 0.08 min
3.Physical Properties
Property meet ASTM D3578 (05)
Elongation at break (%)
• Before Aging Min 650
• After Aging Min 500
Tensile Strength (MPa)
• Before Aging Min 18.0
• After Aging Min 14.0
Competitive Advantage:
1.CE and ISO 13485 guaranteed.
2.Conforms to ASTM D3578 (05) and EN455 (00) Standards.
3.Manufactured under QSR (GMP) and ISO9001 : 2000 Quality Management System.
4.Using FDA approved absorbable corn starch, USP grade.

Location : Room 803,Office Tower D,Ming Run Business Building,No.199Huang Bian North Road,BaiYun District,Guangzhou City, Guangdong Province,China, 510000 Guangzhou,
Contact : Kam Catherine, +8613668928933

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Medical Latex Exam Gloves disposable Grade

Search in a category : Medical
Search in a category :
latex, medical, gloves, grade, exam, disposable
France 361002 Second hand goods
Injection Molding with best OEM factory

Friday, May 16, 2014

Quantity : 5000sets - Price : $1000-5000/set

Injection Molding Description Description: 1.Mould Base: HASCO, DME, RABUDIN, DIN, JIS, LKM. 2.Mould Core: 718,S136,P20,NAK,LKM,EK4,X13T6W etc. 3.Hot runner: Mold-masters,Master Tip,Husky,Hasco,DME,Yudo,Incoe,Thermopla y etc. 4.Standard Parts: DME,HASCO,NEAREST ANSI STANDARD...

Xiamen Karo Co.,Ltd

France 361002 Second hand goods
Cheap plastic cnc prototypes

Friday, May 16, 2014

Quantity : 50000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd

France 361002 Second hand goods
3D Print Plastic rapid protoyping maker

Friday, May 16, 2014

Quantity : 500000pcs - Price : $1-25/pc

Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...

Xiamen Karo Co.,Ltd