Manual Molding Silicone Rubber
Quantity : 200kg Price : FOB shenzhen USD 4.9
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubberis mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration,
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
c. Operation Instruction of RTV molding silicon rubber: :
1. The manual mold silicon is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so t the products made will not deform. tha
Note: The time for vacuum-pumping should be less than 3—5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
FAQ of manual molding silicone rubber
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Any more information, please feel free to contact Mr. Fred.
MSN: xnxytqh(at)163(dot) com
Skype: fredtqh
Email: fredtqh (at)gmail(dot)com
Tel: 086-755-89948006
Contact : fred tang, 8675589948006
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Manual Molding Silicone Rubber Search in a category : Raw materials Search in a category : silicone, molding, rubber, manual |
Wednesday, May 24, 2017
High quality, clean label pastry margarine, for all kind of folded dough: for Danish pastry or French pastry products for fresh or frozen products applications pastry margarine without hydrogenated fats without preserving agents only with natural color agents with natural butter...
Eurocas International SRL
- 305500 - Lugoj
- +40 2 56 35 02 67
Tuesday, September 12, 2017
Ownership and operation of poultry farms and slaughterhouses; production of pet food products; production of canned, packed and frozen poultry products; ownership and operation of poultry products and pet food products retail outlets. Poultry products : - Canned and Packed Poultry...
Elmazraa
- 8012 - nabeul
- +21 6 97 66 93 81
Monday, March 01, 2021
Quantity : 10 - Price : USD 665
Buy Konica KM1024 LH from Bandar Electronic Printhead is 100% safe, Because purchase products at Bandar Electronic PRINT provide a 100% money back guarantee.products Location BBandar Electronic Printhead : Jl. Genteng Besar No 43 Surabaya,Phone/WhatsApp: +6285270007957 To purchase...
Bandar Electronic Printhead
- 60275 - Surabaya
- 085270007957




