Algomtl
svgfair.com
 
Manual Molding Silicone Rubber
Details
China Raw materials
Raw materials

Manual Molding Silicone Rubber

Quantity : 25kg/drum   Price : FOB shenzhen USD 4.8

Brief Description/Features of Manual Molding Silicone Rubber
Manual molding silicone rubber
1. Good elasticity
2. Non-deformation
3. Heat resistance
4. Low shrinkage
a. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc.
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment antivibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two component. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3—5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
FAQ of manual molding silicone rubber –
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material.
The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely.
Location : Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China, 518117 Shenzhen, Guangdong,
Contact : Tracy Tang, +13 5 10 44 67 25

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Manual Molding Silicone Rubber

Search in a category : Raw materials
Search in a category :
molding, rubber, silicone, manual
Hong Kong 200000 Environment / Ecology
Pipe Fittings Pulp Tray

Friday, December 09, 2022

Pipe Fittings Pulp Tray Overview Essential details Brand Name: OEM Material: Recycled Paper, pulp, bagasse pulp, bamboo pulp, straw pulp Model Number: HC-PB002 Place of Origin: Binh Duong, Vietnam Industrial Use: Grocery Application: packaging insert Feature: Biodegradable...

  • 200000 - Shanghai
  • +84(274)3899355
Hong Kong 200000 Environment / Ecology
Chocolate Bagasse Pulp Tray

Thursday, September 15, 2022

Chocolate Bagasse Pulp Tray Overview Quick Details Material: Bagasse Pulp, pulp, bagasse pulp, bamboo pulp, straw pulp Pulping Type: Chemical-Mechanical Pulp Pulp Style: Virgin Bleaching: Bleached Place of Origin: Binh Duong, Vietnam Brand Name: OEM Model Number: PH002 Application...

  • 200000 - Shanghai
  • +84(274)3899355
Taiwan 330 Construction goods
Headed rivet, plug bolt and pin for castors made in Taiwan

Wednesday, October 21, 2020

Shining Jins Enterprise Co., Ltd. was founded on 1975, and we have many years experience manufacturing cold forged and turned metal parts for both Taiwan domestic and International markets. In addition to Shining Jins manufacturing development, we also continue our improvements throughout...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
 
Secure payment

Information

Top search