LSG6K10D Ring Wave Generator
LSG6K10D Ring Wave Generator/Surge Generator
Introduction:
Ring wave generator is completely meet the requirements of IEC61000-4-12, GB/T17626.12 and ANSIC62.41/45.Ring wave generator is used for the simulating electrical network, the power supply of the reactive load the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. It is widely used in electronic equipment.
Surge generator is designed according to IEC61000-4-5 and GB/T17626.5,and completely meet the requirements of the standards. It is widely used in the fields of industry control equipment, house-holding appliance,medical electronics, communications electronics,components, auto control equipment and etc.
Standard:
IEC61000-4-12 GB/T17626.12、ANSI C62.41/ 45, IEC61000-4-5和GB/T17626.5
Features:
1. 7 inches LCD touch screen, with plentiful functions, easy to operation and update the software.
- User can design the test program, and has 1000 groups memories.
- Monitoring the surge voltage and current waveform by work with an external oscilloscope.
- Built in single phrase 10A (16A) network, makes the equipment smaller and convenient.
- With high-strength plug in the panel, EUT can connect with the equipment convenient and reliable.
- Monitoring the work voltage and current of the EUT. Overvoltage protection and overcurrent protection.
- Intelligent test the surge output, warning at voltage error and no output.
- Intelligent judge the abnormal of high voltage and surge output.
Parameters of Ring Wave Generator:
Voltage Oscillation frequency (open): |
100kHz±10% |
Output voltage(open): |
(250V~4000V)±10% |
Frontier(open circuit voltage,T1,10%~90%): |
0.5μs±30% |
Frontier(short circuit voltage,T2,10%~90%): |
≤0.9μs |
Decay Rate (open circuit voltage) |
40%<<span style="font-family: 宋体">(PK2)/(PK1)<110%</span> |
40%<<span style="font-family: 宋体">(PK3)/(PK2)<80%</span> |
|
40%<<span style="font-family: 宋体">(PK4)/(PK3)<80%</span> |
|
Short circuit current at 3500V(PK1): |
292A±10% @12Ω |
117A±10%@30Ω |
|
Interval: |
1s~99s |
Impulse times: |
1~9999times |
Output mode: |
Positive, negative, positive/negative auto |
Output Impedance: |
12Ω,30Ω |
Phrase: |
asynchronous, synchronous |
Coupling and decoupling network(CDN): |
16A single Phrase or 20A 2phrases/5wires |
Parameters of Surge Generator
Output voltage (open) |
6kV (Max) ±5% |
Front time |
1.2μs ±30% |
Time to half-value |
50μs ±20% |
Output current (short) |
3kA (Max) ±5% |
Time to half-value |
20μs ±20% |
Output polarity |
Positive, negative, positive/negative automatically |
Output impedance |
2Ω±10% |
Synchronization,asynchronization |
Synchronization,asynchronization |
Inject phase |
Freely set at 0-360°,resolution: 1° |
Trigger mode |
Auto or manual, single |
Surge times |
1-9999 times |
Memories |
1000 groups |
Surge interval |
20-9999s |
Accuracy: |
5% |
CDN |
AC:single phrase 300V,10A (16AMax), 50/60Hz |
DC: 300V, 10A (Max) |
|
Working environment |
Temperature: 15°C-35°C humidity: 0%-75% |
EUT power supply |
AC220±10%, 50/60Hz, about 300W |
Dimension |
W470mmxH260mmxD500mm |
Weight |
About 35kg |
Contact : Peng Penny, 86 (0)795 3560528
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of LSG6K10D Ring Wave Generator Search in a category : Equipment goods Search in a category : ring, lsg6k10d, wave, generator |
Tuesday, December 31, 2013
Quantity : 100 - Price : $60
Features: 1. Thickness 10mm, super slim; 2. Installation Type: Embedded / Suspended 3. Sandblasting bright silver for 10mm thichness series; 4. Imported Korea diffusion plate,transmittance up to 93%; 5. 0.2W 2835 LEDs,high luminous efficacy, Low light degradation. Beam angle≥110,Ra≥80; 6...
Sinpco Optoelectronic Co.Ltd
- 518100 - Shenzhen
- 8613530366710
Tuesday, August 25, 2015
Quantity : non limité - Price : mini
Reliable Company looking partners in europe to export products mainly from Poland and other countries Eastern and Central Europe. We have contacts with european manufacturers so we are able to find all brands products at more competitive prices. At the same time we are guaranteeing...
Ecobis
- 42-510 - Tuliszow
- +48 7 30 88 19 53
Saturday, March 29, 2025
Quantity : 100,000 pc
JBI is one of the leading professional screw suppliers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...
Jeng Bright International Corporation
- jbitwco
- 830 - Kaohsiung City
- +88 6 77 02 10 77
