Algomtl
svgfair.com
 
Details
Taiwan Audio and Video
Audio and Video

LLDPE/MLLDPE Three-Layer Co-Extrusion

Price : mail

1. model no. 3L-BAIR-2100 Three-layer Co-Extrusion Blown Film Line is an extra wide design for film width 2100mm. It is unnecessary to change screw even in the condition of changing different materials. 2. Film thickness: 0.012~0.300 mm. Standard film width: 2100mm, the max. output: 520 kgs/hr (it depends on materials) 3. Screw diameter is available for A: o65 m/m B: o85 m/m C: o65m/m 4. Three-layer inner cooling type die: Combined with cooling air constant-temperature device, 24 hours fully automatic monitor and control. Effectively increases confirmative films.
Location : No. 726, 14 Chia, Ta-Che Village, 621 Ming-Hsiung, Ciayi County,
Contact : Emily Yen, +88 6 52 75 52 30

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
LLDPE/MLLDPE Three-Layer Co-Extrusion

Search in a category : Audio and Video
Search in a category :
lldpe, three, mlldpe, extrusion, layer
China 518000 Stock lots
High Speed 3d & 2.5d Scanning System 14mm

Friday, April 08, 2022

The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, which solves the problem that the traditional laser scanning galvanometer can only realize plane scanning and small range scanning, and...

Shenzhen Han's Scanner S&T Co., Ltd.

China 518000 B2B Services
High Speed 3d & 2.5d Scanning System 14mm

Friday, November 11, 2022

The 2.5D&3D system has the function of conventional 2D galvanometer, and a zoom module is added on the basis of the conventional galvanometer, which solves the problem that the traditional laser scanning galvanometer can only realize plane scanning and small range scanning,...

Shenzhen Han's Scanner S&T Co., Ltd.

China 213300 B2B Services
Plastic Profile Extrusion Line

Sunday, January 29, 2023

This plastic profile extrusion line consists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing line features of good plasticization, high output capacity, low power consumption, and etc. The main plastic profile extruder speed controlled...

JWELL Extrusion Machinery Co., Ltd

  • 213300 - Jiangsu
  • 86 0519 87878918
 
Secure payment

Information

Top search