LG steel tooth bits-Tricone/Rock bits
Quantity : 500pieces Price : $300/piece
LG steel tooth bits-Tricone/Rock bits
Cutting Sstructure
The wear-resistance of teeth is enhanced with premium tungsten carbide hardfacing on the tooth suifaces for steel tooth bit.The durability of premium tungsten carbide inserts is improved with new formulas and new techniques for insert bit.
Gauge Structure
Multiple aguge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone ,tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.
Bearing Structure
High precision roller bearing with two thrust faces .Balls lock the cone .The leg bearing can get larger by
arranging the rollers in groove of the cone hole,so it can receive more WOB,and suitable for high RPM.Thrust faces hardfaced with wear resistant alloy.Abrasion resistance and seizure resistance of the bearing are improved.
Seal and Lubrication
Premium HNBR O-ring,optimal seal compression and curved seal structure can enhance seal performance.the pressure compensator system and advanced grease can greatly increase the lubricating reliability.
Product Application
It can receive higher WOB and faster rotary speed than conventional roller bearing bits .It is suitable for high RPM applications.
Recommended Drilling Parameters
| IADC | WOB(kN/mm)(bit dia) | RPM(r/min) | Applicable Formations |
| 115 | 0.3--0.75 | 200--80 | Very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk ,etc. |
| 125 | 0.3--0.85 | 200--80 |
Soft formations with low compressive strength and high drillability,such as mudstone,gypsum ,salt,soft shale,soft limestone,etc. |
| 135 | 0.3--0.95 | 180--80 |
Soft to medium soft formations with low compressive strength and high drillability.such as medium soft shale, hard gypsum,medium soft limestone,medium soft sandstone,soft formation with harder interbeds,etc. |
| 215 | 0.35--0.75 | 180--80 |
Medium formations with high compressive strength , such as medium soft shale,hard gypsum,medium soft limestone,medium soft sandstone,soft formation with harder interbeds ,etc. |
Contact : Lydia Wu, 86 010 57290815
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of LG steel tooth bits-Tricone/Rock bits Search in a category : Equipment goods Search in a category : rock, steel, tricone, bits, tooth |
400004 Construction goodsReport abuse
Tuesday, May 12, 2026
Programming interface 5L Grade B Pipe shows 25000 PSI least Yield Strength and 45000 PSI Minimum Ultimate Ttensile strength. API 5L Pipe comes in Seamless and Welded steel line pipe for pipeline transportation frameworks in the oil and flammable gas ventures. Programming interface...
Veer Impex
- 400008 - Mumbai
- 9082006249
116000 B2B ServicesReport abuse
Tuesday, October 30, 2018
this series of bricks are made from high quality fused MgO,fused corundum and graphite as main raw materials and phenolic resin as binder . the products are mainly used in the bottom and sidewall of ladle with better corrosion and erosion resistance. Location : 403, D-5 Building, Chuntianyuan...
LIAONING MINERAL & METALLURGY GROUP CO., LTD
- 116000 - Dalian
- +8641182557586
510000 Raw materialsReport abuse
Wednesday, October 20, 2021
Advantages of water-based aluminum paste The main components of the water-based aluminum paste are snow flake aluminum particles and petroleum solvent, which is in the form of a paste. Its characteristics are that the surface of the aluminum sheet is smooth and flat, the particle...
Sunflower Chemical Group
- 999077 - Hong Kong
- +13 5 90 97 39 64
