Algomtl
 
KH FT WAX 105
Details
China Clothes
Clothes

KH FT WAX 105

The Fischer-drop point wax are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.

In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has a relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-drop point wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range, the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has an irreplaceable advantage over PE wax.
KH FT Wax 105 uses the feedstock from coal, They have a fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.
In the processing and production of a masterbatch, KH FT wax 105 can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration
Features of KH FT WAX 105
High melting point
High stability
Low viscosity
Low oil content
Good hardness
Our KH FT WAX 105 is complied with:
FDA 21CFR175.105(Hot Melt Adhesives Additives)
If you had other FDA requirements, please contact us: info@khonorwax.com
Storage of KH FT WAX 105
Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.
Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.
Application of KH FT WAX 105
In PVC processing as the lubricants;
Hot melt adhesives;
Masterbatches;
Rubber industries;
Pigment and coating;
Polishes;

If you need any kinds of polish wax, please contact us, as a professional wax supplier, King Honor is willing to offer you high quality products.

Location : 25F, Tian 'an International Building, 88 Zhongshan Road, Zhongshan District, Dalian, 116001 Dalian,
Contact : com Qualiprow, 0411 81822086

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
KH FT WAX 105

Search in a category : Clothes
Search in a category :
Morocco Craft
photo not available

Thursday, September 01, 2011

Installed in the medina of Fes, Morocco, since generations, we produce wholesale handicrafts: Poof “Ottomans”, handbags, lamps, ceramic, tiles, Caftan and cosmetic products such as olive oil and Argan oil.. Our wholesale prices are decreasing according to the quantity ordered. We...

Al Hashimia Corporation

Bolivia none Everything else / Bulk
photo not available

Tuesday, July 10, 2007

Quantity : 2000 Tons

we sell diferents grains of high cuality : Quinoa, Cañahua ,Amaranth, Maca and his derivates like pops, flakes, fluor.Location : Urbanizacion"Los Pinos" Zona Norte, none Oruro, Contact : Jean-marie Galliath, +59 1 25 28 51 88

SONAPTO S.R.L.

  • sonapto
  • none - Oruro
  • +59 1 25 28 51 88
  • +59 1 70 42 43 19
Russia 125363 Audio and Video
photo not available

Tuesday, May 08, 2012

Glass bead for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls...

ermakhim

 
Secure payment

Information

Top search