JIS SKS3 steel
OTAI SPECIAL STEEL is SKS3 steel stockholders and suppliers from china. more 16 years experience in JIS SKS3 tool steel round bar, flat bar and plate supply.
JIS SKS3 Steel is a high quality Cold work tool steel, It belong to the high quality high carbon alloy tool steel. Oil Quenched & Tempered Hardenss is 28-34 HRc. JIS SKS3 steel Annealing delivery hardenss less than 250HB.
Related Specifications ASTM A29/A29M DIN EN 10083/3 JIS G4404 GB/T 3077
Form of Supply
JIS SKS3 tool steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. JIS SKS3 steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. SKS3 steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar to tight tolerances.
Round
sheet
Square
Plate
Chemical composition of SKS3 steel
| C(％) | 0.90～1.00 | Si(％) | ≤0.35 | Mn(％) | 0.90～1.20 | P(％) | ≤0.030 |
| S(％) | ≤0.030 | Cr(％) | 0.50～1.00 | V (％) | — | W(％) | 0.50～1.00 |
SKS3 steel Heat treatment Related
- Annealing of SKS3 Tool steel
Slowly heated to 740-760 ℃（1364-1400℃） and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. The SKS3 tool steel will get MAX 250 HB （Brinell hardness）.
- Hardening of SKS3 tool steel
SKS3 steels should be heated uniformly to 780-820°C (1436-1508°F) until completely heated through. If needed, the steels can be preheated at 300-500°C (572-932°F). About 30 min/per 25 mm of ruling section is to be provided and then the steels should be immediately quenched in oil.
- Tempering of SKS3 tool steel
Tempering of SKS3 steels is performed at 100-350°C (212-662°F), Soak well at the selected temperature and soak for at least one hour per 25mm of total thickness. Get Rockwell C hardness of 55 to 64.
Temperature [℃] 100 150 200 250 300 350
Hardness [HRc] 64-63 63-62 62-61 60-59 58-57 56-55
Mechanical Properties
The mechanical properties of SKS3 tool steels are outlined in the following table.
| Elastic modulus (@399°C/750°F, hardened to 62 HRC ) |
Elastic modulus (hardened to 62 HRC) | Yield (0.2%, hardened to 55 HRC) |
Yield (0.2%, hardened to 60 HRC) |
Yield (0.2%, hardened to 62 HRC) |
Yield (0.2%,hardened to 50 HRC) |
| GPa | GPa | Mpa | Mpa | Mpa | MPa |
| 172 | 193 | 1800 | 2150 | 2200 | 1350 |
SKS3 steel Applications
SKS3 steels are mainly used for short run tooling for cold forming dies, blanking dies, and cutting tools operating at ambient temper.
SKS3 tool steel typical applications include medium run dies, intricate press tools, drawing punches, broaches, bushings, lathe centres, chuck jaws, master cavity sinking hobs, paper cutting machine knives, plug gauges, thread gauges and precision measuring tools. Also commonly used in applications such as cams, cloth cutting knives, cold taps, reamers, collets, cutting hobs, strip slitting cutters, trimmer dies, tube expander rolls, plastic moulds and woodworking knives ature.
Regular size and Tolerance
| 1) Hot Rolled round bar | |||
| Diameter (mm) |
Diameter Tolerance (mm) |
Diameter (mm) |
Diameter Tolerance (mm) |
| ≤12.70 | -0.13 ～0.30 | >50.80～63.5 | -0.25～0.76 |
| 12.7～25.40 | -0.13～0.41 | >63.50～76.20 | -0.25～1.02 |
| >25.4～38.10 | -0.15～0.51 | >76.20～101.60 | -0.30～+1.27 |
| >38.1～50.80 | -0.20～0.64 | >101.60～203.20 | -0.38～3.81 |
| 2) Hot Rolled steel plate | |||
| Thickness (mm) |
Thickness Tolerance (mm) |
Thickness (mm) |
Thickness Tolerance (mm) |
| ≤25.4 | -0.41～0.79 | >127～152 | -1.60～2.39 |
| >25.4～76 | -0.79～1.19 | >178～254 | -1.98～3.18 |
| >76～127 | -1.19～1.60 | >254～305 | -2.39～3.96 |
Others SKS3 have not specified size, pls contact our experienced sales team.
JIS SKS3 tool steel round bar and flat sections can be cut to your required sizes. SKS3 tool steel ground bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. JIS SKS3 steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.
Contact our experienced sales team to help you with your SKS3 tool steel questionsadn enquiry by Email or Telphone. The questions will be reply in 24 hours.
OTAI SPECIAL STEEL CO., LTD
Email: jack@otaisteel.com TEL: 0086-769-33232622 FAX: 0086-769-88705839
Contact : kamen chan, +8676923190193
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of JIS SKS3 steel Search in a category : Stock lots Search in a category : steel, sks3 |
22440 Stock lotsReport abuse
Tuesday, December 03, 2024
American Samsung Refrigerators
Quantity : 1000 - Price : 590,00 €
Exclusive Offer: Lot of 1000 American Samsung RS68CG882ES9 Refrigerators at Clearance Price! Seize this unique opportunity with a lot of 1000 American Samsung RS 68 CG 88 2E S9 refrigerators at an exceptional clearance price of €590 per unit. This high-end model is perfect for wholesalers looking to offer their customers a product that combines elegant design, advanced technology, and energy efficiency. Key features of the Samsung RS 68 CG 88 2E S9: - Large storage capacity ...
TRANSIDI
- 22440 - PLOUFRAGAN
- 02 30 96 63 26
- 33(0)603670505
DecorationReport abuse
Monday, February 24, 2014
Quantity : 1 - Price : 860,00 €
Setter in jewelry and " Meilleur Ouvrier de France " lovers of beautiful motorcycles, and creator at heart, the realization of high-end lamps inspiration Harley Davidson and set with a diamond were obvious. I invite you to discover my collection, exclusively composed of unique pieces...
philippe GOMEZ
- - meximieux
- 06 12 52 01 20
03203 ClothesReport abuse
Wednesday, November 20, 2024
Quantity : 3 conteneu - Price : 0,30 EUR/KG - 2,50 E
1. DESCRIPTION OF PRODUCT: Summer and winter second hand cloth for Men/Women/Children, Bedding and House classified in 2 categories: A, B, and B + C 2. QUALITIES: - Quality A classified: Almost news articles without use, some of them of firs brands, and classify according gender, type, etc...
Euroafrique Recycling SL
- euroafritex
- 03203 - Alicante
- 965020177
- +34 9 65 02 01 77
- +34 6 32 82 94 61
