B2B Services

Installation Standard for W Beam Guardrail

Before the highway guardrail installation, the construction preparation shall be made, the detailed construction scheme shall be determined, and the data of various facilities shall be accurately mastered, especially the exact location of various pipelines embedded in the subgrade. During the construction process, any damage to underground facilities is not allowed.

The control points shall be bridges, culverts, channels, three-dimensional intersection, the opening of the separation belt and the hole, and the positioning and lofting of the column shall be carried out in advance. If the roadside guardrail is not fully installed, the setting position of roadside wave guardrail shall be rechecked according to the setting principle of roadside wave guardrail given in the design and the implementation of the main project, and it shall be adjusted appropriately according to the actual situation.

Construction and installation tools of w beam guardrail include: pile driver, excavation tool, tamping tool, pliers, hammer and theodolite, level gauge, tape measure and other measuring tools.

Specification for W beam guardrail installation:

(1) The column installation shall be carried out strictly in accordance with the design drawings and coordinated with the road alignment.

(2) The columns shall be firmly embedded in the soil to reach the design depth and be perpendicular to the road surface.

(3) For general road sections, the column is driven into the road with accurate positioning during construction. When driving too deep, it is not allowed to pull out the part of the column for correction, it is necessary to pull out all of them, and then drive again after the foundation is compacted.

(4) When the driving method cannot be used for construction, the excavation method shall be adopted to bury the column, and the embedded guardrail column foundation shall be C25 concrete foundation. When the column is installed, the backfill shall be made of good materials and compacted layer by layer (the thickness of each layer shall not exceed 15 cm), and the compactness of the backfill shall not be less than the adjacent undisturbed soil. The column pit in the rock shall be backfilled with granular material and compacted.

As a professional china steel pipe suppliers, we provide galvanized well pipe, galvanized corrugated guardrail, highway guardrail for sale, china steel guardrail and etc. Want to know types of water supply or more? Contact us.

Location : Yongnian Industrial Park, Handan City, Hebei Province, China., 057150 Yongnian,
Contact : Li Simon, 0310 6668080

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Installation Standard for W Beam Guardrail

Search in a category : B2B Services
Search in a category :
guardrail, beam, standard, installation
Taiwan 24158 Equipment goods
CNC Dielectric Fluid EDM (Standard) Series S50,S60,S90

Thursday, August 06, 2015

Quantity : 30 sets

The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...

Sane Kuei Machinery Co., Ltd

Spain 22520 Construction goods
Porte entrée aluminium

Wednesday, November 26, 2014

Quantity : 1 - Price : 910 €

- Porte entrée alu SEGURA 910 €/HT - CARACTÉRISTIQUES TECHNIQUES : - Dormant et vantail de 50 mm d'épaisseur en aluminium à rupture de pont thermique. - Profilé en aluminium de 2,5 mm d'épaisseur. - Triple équerre de sertissage dans les angles. - Panneau sandwich décoratif...

Puigmetal® Aluminier Technal Europe

  • puigk2
  • 22520 - FRAGA
  • +34 9 74 47 32 54
  • +34 6 06 32 54 67
France 361002 Second hand goods
China Custom Plastic Part

Friday, May 16, 2014

Quantity : 5000000pcs - Price : $0.25-5/pc

Plastic Injection Parts Description Company Profile: We specilizes in developing and producing plastic injection parts and injection moulds for electrical appliances,home appliances,computers,telecommunication devices,pharmaceutical appliances, bathroom accessories and building...

Xiamen Karo Co.,Ltd