Installation location of auto radiator Most of the car radiators are installed in front...

Installation location of auto radiator

Most of the car radiators are installed in front of the engine and the fan. Its function is to increase the heat dissipation area and accelerate the cooling of the coolant. In order to take away the heat from the radiator as soon as possible, a fan is installed behind the radiator to work with the radiator.

Working principle of mazda astina radiator

The principle is this, according to the water temperature, engine load, signal transmission to the computer, engine computer control fan high and low speed relay, but also affected by air conditioning pressure, air conditioning computer receives air conditioning pressure switch, indoor and outdoor temperature, and other signals, and then through the bus to air conditioning The signal is transmitted to the engine computer. The engine receives the signal that can be turned on, controls the compressor, and controls the fan relay to pull in. When the air conditioner pressure is affected by the environment and its own influence increases, the engine computer receives the air conditioner computer signal, and controls the fan high speed relay to suck. The fan runs at high speed.

The heat generated when driving a car is enough to destroy the car itself. Therefore, the car is fitted with a ferrule but the system protects it from damage and keeps the engine in the proper temperature range. The radiator is the main part of the cooling system and is designed to protect the engine from damage caused by overheating. The principle of the radiator is to use cold air to reduce the temperature of the coolant from the engine in the radiator. The heat sink has two main components, a heat sink consisting of small flat tubes, and an overflow tank (on the heat sink: the top, bottom or sides of the sheet).

NISSENS :

Year : 1994

OEM : K80215200E/K801152000

Car Make : MAZDA

Product Description

MOQ : 30 PCS

Port : Nanjing or Shanghai

BT NO. : U601559

Supply Ability : 600000 sets/year

Core Size : 670*348*26AT

Place of Origin : Jiangsu, China

Application : ASTINA/323BA'94 AT

DPI No : 1559

Warranty : 12 months

Packaging : Carton Box or as your request

Delivery : 45 days

U&C AUTO PARTS CO.,LTD was founded in 2002. Now with owning factory area of 69,000 square meters, four advanced production lines imported from Japan and USA, and 220 professional employees.

All locations of Better cooling have been certificated by TS16949. Besides our high frequency tubes are exported all around the world.

Currently, we have more than 2000 models of auto radiators, 980 models of condensers, 424 models of all aluminum radiators, 170 models of intercoolers and 300 HD truck radiators, with an annual capacity about 600,000 pieces and continuously increasing 60-120 new models per year. We have built long-term cooperation relationship with many global customers, e.g. being Tier-1 supplier for Chrysler Group LLC since 2008.