Hydraulic Liner Hanger Tie-Back Assembly
Quantity : 500000tons Price : $5-$200000
The tie-back assembly is a special cementing tool for tieback operation.
Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW offers variety of tieback seal nipples and tieback packers to accommodate liner top extension and remedial operations.
Tieback Procedures of Hydraulic Liner Hanger Tie-Back Assembly
A. Preparation before casing
Measure and drift the casings carefully and clean all the threads.
Calculate the kelly-up of the casing (the particular part of the last casing which is above the rotary table) and arrange the casing string.
Prepare several casings, which are approximately 0.5m shorter than the others and convenient for kelly-up calibration. (The actual kelly-up is not equal to the calculated value due to measurement error and the remaining threads of the casings.)
B. Polishing the polished bore receptacle
Connect the milling shoe and trip in. Polish the inner surface of the polished bore receptacle, make sure there is no debris.
Note the depth of the milling shoe when it reaches the top of the seal assembly (judge from the changes on pressure and WOB). Then lift the drill string for 1m.
Use a drilling rate of 40~50rpm and a normal flow rate. Slowly lower the drill string. Polish the inner surface of the polished bore receptacle twice or three times. Each time polish 3~4min. During the last polishing, apply an additional load of 2~3t when the torque suddenly increases (the milling shoe reaches the top of the seal assembly) during the last polishing. Polish for another 2~3min and note the depth of the milling shoe, which is an important clue for the casing setting depth.
Circulate with high flow rate for 5min.
Trip out and check the milling shoe. If there is a circle of polished trace and the diameter is equal to the I.D. of the left thread on the seal assembly, then the milling shoe have reached the bottom of the polished bore receptacle.
Features of Hydraulic Liner Hanger Tie-Back Assembly
With the guide shoe and circulate bore, it can stab into polished bore receptacle before cementing, more convenient than conventional cementing which pumps down cement before stabbing.
With its streamline shape, the guide shoe can stab into polished bore receptacle easily.
The Tieback Seal Assembly with three stacks of molyglass seal is designed for high-pressure and high-temperature liner tieback completions. Available in seal length is 1.2m.
Technical Parameters of Hydraulic Liner Hanger Tie-Back Assembly
Specifications, mm |
Φ177.8 |
Φ127.0 |
Sealing capacity, MPa |
25 |
25 |
Heat-proof Rating, ℃ |
120 |
120 |
Available Sealing Length, mm |
1200 |
1200 |
I.D., mm |
Φ155 |
Φ108 |
SAIGAO GROUP is one of professional oil equipment suppliers. We provide Fishing Tools, Mud Pump Parts, tie back receptacle, tie back cementing, tie back casing, liner hanger assembly, hydraulic hanger, casing tie back, tie back liner and so on. Want to know about tie back liner procedure? Please contact us.
Contact : Liu Rex, +86 0531 69959201
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Hydraulic Liner Hanger Tie-Back Assembly Search in a category : Equipment goods Search in a category : hydraulic, liner, hanger, assembly |
Wednesday, December 18, 2024
Quantity : 500 - Price : USD0.5/pc
100 years American Technology China Excellent Manufacturing Partner of Fortune top 500 A Leading Brand in Hose Clamp Industry Germany Type Hose clamp KEBG12X032 1)bandwidth:12mm 2)Thickness: 0.6mm 3)Material: W4 Stainless Steel 304ss 4)Diameter range: 20-32mm 5)These clamps...
King Seal Fastener Technology(Anhui) Co., Ltd.
- 233010 - Bengbu
- 86 552 4193229
Thursday, December 12, 2024
Quantity : par conten
Prista Oil Holding is a bulgarian producer of lubricants, greases and special fluids leading in the balkans. Our goal iis to ncrease our export sales towards Africa. We supply: Engine oils for PC/CV, 2/4 stroke oils, industrial oils, compressor oils, gear and transmission oils...
Prista Oil
- 1407 - Sofia
- 00 359 888 888 984
Thursday, October 03, 2019
Price : 56 €/m²
modular metal building all sizes, temporary or permanent. Buildings in extensible and fully removable kit. main metal structure composed of profiles type "C" or "SIGMA" cold formed and galvanized secondary structure on coverage and facade perimeter composed of profiles like "Z" cold...
HADDOUCHE
- 33140 - CADAUJAC
- 06 72 47 36 41
- +33 6 72 47 36 41