HWES Ten folded enclosure control cabinet by welded frame

1.The enclosure cabinet is made by the steel with ten times bent for highly strengh,so the structure is firm, able to carry a heavy load.the cost of this cabinet is lower than the PS cabinet.

2.We apply cold rolled steel or stainless steel for all of our products, 2mm thickness of front door, 1.5mm thickness of panels, 2.5mm galvanized mounting plate.

3.The size of ES and PS series cabinets can be matched with each other, and the parts and accessories are versatile.they can be quickly installed.

4.The front door is of single or swing door, with an angle of 130 degrees,the height of the door to the ground is 25mm.the reinforcing frame is inside the front door, equipped with to 25 mm spacing of mounting holes.In addition, the front door provides mounting crossbar to strengthen it and more flexible to binding wire.

5.The panel are fastened by bolts and fasteners.

6.The mounting plate can be adjusted back and forth for the distance of multiple of 25mm,The door, top cover, rack are all able to earth. There are 3 adjusted cable boards at the bottom for cable arrangement.