Everything else / Bulk

How To Use The Bottle-Top Dispensers

This article will focus on the methods of using the bottle-top dispensers.

1. Put the intake pipe into the dispenser and then tighten the nut.
2. Put the drain pipe into the dispenser and then tighten it.
3. Take off the cap of the drain pipe and put it under the drain pipe
4. Adjust the volume from zero to numerical value by rotating scale
5. Start the exhaust process. First, we should ensure the cap of the drain pipe open. Second, we lift the piston for a certain distance and then press it down. At last, we repeat the previous steps for several times until we see the bubbles are completely eliminated through the observation window.
6. Prepare the separation after the exhaust process. And pay attention that if we always can see the bubbles, we should check whether the suction pipe or other valves are installed correctly.
7. Adjust the volume from zero to numerical value from an arbitrary direction.
8. Press the piston to the bottom, and then adjust the knob to zero scales. Lock the dispenser.
9. Transfer the liquid. The piston is lifted stably to the top and then pressed equally stable to the bottom. There is a complete separation process. In this process, we should care that if the piston is lifted too fast, there may be excessive drops dripping into the piston which will cause errors.

Lock the dispensers after separating the liquid. That's all for using the bottle-top dispensers.

Location : Xi'an City , Shaanxi Province, P.R.China, 710077 Xi'an,
Contact : Bruce Lu, +86 29 89284429

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
How To Use The Bottle-Top Dispensers

Search in a category : Everything else / Bulk
Search in a category :
dispensers, bottle
Turkey 34510 Raw materials
photo not available

Thursday, June 16, 2016

Application Method 1. Glue is applied on textile or leather. 2. Patterned or fully coated glue is fixed by heat before foil transfer properly. 3. Stamping the foil ,heat: 130C-150C, pressure 4-6 bar, touch time 3-5 s. 4. Discard the carrier film after stamping process.Different...

Taiwan 428 B2B Services
Focus CNC Co., Ltd.

Wednesday, January 13, 2016

Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...

Focus CNC Co., Ltd.

France 59590 B2B Services
DIN BELLOWS GLOBE VALVE

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Bellows Seal Stop Valves(Straight-Through Type) DIN Bellows Seal Stop Valve DIN Bellows Globe Valve DIN Faltenbalgventil Durchgangsform DIN Válvulas de fuelle DIN ventil uzavírací s vlnovcem přímý DIN Standard seteventil med belg (Rett løp modell) DIN Standardında Metal Körüklü...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935