Algomtl
 
HORIZONTAL CENTRIFUGAL PULP PUMPS
Details
China Search / buy
Search / buy

HORIZONTAL CENTRIFUGAL PULP PUMPS

Horizontal SGZ type high-efficiency non-clogging and non-leakage centrifugal pulp pump is a new generation of pulp pump products developed by digesting and absorbing foreign advanced good suction horizontal centrifugal pump and combining the requirements of domestic pulp enterprises for supply horizontal solids handling centrifugal pump. And operation, transportation is widely used in

papermaking, pulp and paper pulping enterprises. For bulk suction horizontal centrifugal pump price list, inquiry now!
FEATURES OF HORIZONTAL CENTRIFUGAL PULP PUMPS
1. The horizontal high pressure centrifugal pump is a rear door structure, and there is no need to disassemble the pipeline for maintenance;
2. The design pressure of the inlet and outlet flanges of the horizontal centrifugal pump is 1.6MPa;
3. Impeller blades (or six blades), open impeller, high efficiency, no need for axial thrust compensation, easy maintenance, and low probability of blockage;
4. The pump shaft adopts lubricating oil, which is seriously worn. It adopts imported cylindrical roller bearing and thrust ball bearing (radial angular contact ball bearing) combined bearing. Cylindrical roller bearings are mounted on the pump end and radial thrust ball bearings are mounted on the rotating surface facing the end;
5. The main pump shaft sealing ring has six combinations of single-end seal, packing seal, single-end seal, mechanical seal series, double-end mechanical seal, pump seal, single-end seal and dynamic seal. Users can choose the actual situation and requirements according to their needs;
6. The impeller adopts lost wax casting and dynamic balance check;
7. The materials are cast iron, cast steel, ordinary stainless steel and duplex stainless steel.
Want to explore the capabilities of a China single stage centrifugal pump? Get in touch with All Pumps Machinery and find out more about its features.
HORIZONTAL CENTRIFUGAL PUMP SPECIFICATIONS
Pump Connection Size
2.5"- 20" (65mm - 500mm)
Max. Pump Flowrate
3300m3/h (14531 GPM or 916L/S)
Max. Pump Head
100m (328 feet)
Motor Power Range
0.55kw to 110kw
Speed Range
750rpm to 2960rpm
Impeller Type
Opening three blades and Semi Open three blades
Shaft Sealing
Gland Packing, Mechanical Seal
Max. Working Pressure
2.5MPa
Max. Working Temperature
240°F / 120°C
Allowed Pumping Medium
Consistency≤6%
Materials of Construction
cast iron, cast steel, SS304/316, duplex, etc.
As one of horizontal pump manufacturers, we will do our best to meet all the needs of customers.
If you want to know more about suction horizontal centrifugal pump quotes , please visit our website.

If you are looking for a reliable industrial pumps company, please contact us, and we will be your best partner.

Location : JINSHAN INDUSTRIAL ZONE, SHANGHAI 201507, CHINA, 201507 shanghai,
Contact : pumpscn all, +13 6 56 77 31 97

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
HORIZONTAL CENTRIFUGAL PULP PUMPS

Search in a category : Search / buy
Search in a category :
centrifugal, pumps, horizontal, pulp
France 92600 Everything else / Bulk
DELTA PARTNER'S : Sandal thinness THE CELLULETTE is the 1°

Sunday, September 02, 2007

THE CELLULETTE is the 1° sandal thinness with tests of effectiveness carried out by an approved French laboratory, proving a significant thinning in 28 days of use. Proven slimming and anti cellulite effectiveness The sole of CELLULETTE slope backwards at an angle 8 degrees and the...

deltapartners

  • issy
  • 92600 - ASNIERES SUR SEINE
  • +33 1 41 11 34 34
France 59590 B2B Services
Y STRAINER

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
France 47450 Vehicles
photo not available

Tuesday, November 20, 2012

Quantity : 3000 piece - Price : 5 € pieces

AUTOMOBILE(AUTOMOTIVE) MG is a company based in the southwest on AGEN in France, besides our activity of garage, we possess a department of demolition pleased by the prefecture ( n°PR4700005D ). We propose in the sale prizes of universal joints, alternators, demarreurs, cremailleres...

MG AUTOMOBILES

  • 47450 - colayrac saint cirq
  • 05 53 66 52 17
  • 06 08 45 39 39
 
Secure payment

Information

Top search