HL8102 PID Temperature Controller

The HL8102 series digital temperature controller is a microprocessor-based controller with digital LCD display.
The controller is used to control room temperature in industrial, commercial and residential environment via controlling electric modulating valve / damper with 0-10Vdc (4-20mA) signal or floating control.
The controller provided proportional plus integral (PI) control with modulating and floating control output.

• Features
  ●Digital display of sensing temperature and user selected temperature setting on demand
  ●Proportional plus integral (PI) advanced control with analog signal output
  ●0-5Vdc,1-5 Vdc,0-10Vdc, 2-10Vdc or 4~20mA (0~20mA) signal and floating output
  ●Direct / reverse acting output
  ●Output limited for over load protection
  ●Energy saving mode-external energy savings input (ESI) from card key or occupancy sensors
  ●Adjustable unoccupied setpoint for heating and cooling mode control
  ●Sleep mode control
  ●Model available for build-in or remote sensor(RS) function
  ●Remote control (RC) output for interlocking on / off control application
  ●Non-volatile memory (EEPROM) retains usersettings during power loss
  ●Large LCD display with blue backlight
  ● °F or ℃ display unit
  ●Adjustable maximum and minimum setpoint limits
  ●Adjustable deadband (some dual outputs model)
  ●Control off output when system switch at“OFF”position
  ●RS-485 network interface
  ●Modbus RTU protocol
• 24Vac power supply, 50/60HZ