Electronics / Computers

Hart to Modbus Gateway

Description

Product Name: HART to Modbus Gateway
Model No: G1003
The gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station.

Parameters

Name

Description

Gateway Power

9~30VDC

Modbus Interface

RS-232/RS-422/RS485

HART Interface

HART Digital Signal

Consumption

1W

Interface Input Inpedance

≥5KΩ

HART Interface Voltage Insulation Value

50VDC

HART Output Amplitude

500mVpp (500Ω)

Humidity Range

(5~95)%RH

Working Temperature

-20℃~70℃

Storage Temperature

-20℃~70℃

Isolation Voltage

Modbus and HART Interface, 500VAC

Protection Level

IP20

EMC

GB/T 18268.1-2010

GB/T 18268.23-2010

Weight

0.2kg

Construction Material

Housing: ABS/PA66; Clip: POM; Coating: Polyester Epoxy Resin

HART Master Type

The Primary or Secondary Master can be Selected.

HART Network Topology

Support HART Point to Point or Multi-Drop Working Mode, and can Connect 15 Instruments at most

Burst Mode(Burst)

Support HART Slave Device Burst Mode

HART Customized Command

Support 100 HART CUSTOMIZED COMMANDS AT MOST, EACH 5000 BYTES FOR HART INPUT OUTPUT ZONE AND DATE BUFFER ZONE.

HART Modem Mode

Gateway can be set as HART Modem Mode.

HART Sampling Resistor

Optional for Internal Sampling Resistor or External Resistor

Modbus Baud Rate

300,600,1200,2400,4800,9600,19200,38400,57600,115200bps, optional

Modbus Communication Mode

Support Modbus Slave RTU and ASCII Communication Mode

Modbus Function Code

0x03/0x04/0x06/0x10

FAQ

Q: Can I get a free electronic manual?

A: Yes, if you want it, please contact us.

Q: How many modes does it work?

A: The HART to Modbus gateway has four working modes, respectively is normal workingmode, HART modem mode, configuration mode and debugging mode. Gateway mode may be selected by two-bit DIP switch on the gateway.

Q: Can you provided OEM service?

A: Yes, we can, such as communication board, we can also provided fieldbus development toolkit

jiang.yuhang@microcyber.cn +86 18304037682

Location : wensu street hunnan new district, 110015 shenyang,
Contact : Yvette Jiang, +86 18304037682

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Hart to Modbus Gateway

Search in a category : Electronics / Computers
Search in a category :
modbus, gateway, hart
France 17110 Craft
SANZAS CARIMBAS

Monday, March 25, 2013

Quantity : 12 - Price : 62,00 €

Importer or sell lots sanzas carimbas: 12 cm diameter metal keys face exotic wood bottom half coconut. Very good sound. Sold in packs of 25 pieces: 62,50 € the lot is 2,50 € per piece. Minimum purchase a lot. If this proposal please, just send me an e-mail confirmation stating the...

OUTRE MERS

  • outremers
  • 17110 - SAINT GEORGES DE DIDONNE
  • +33 6 81 16 68 53
Hong Kong 852 Equipment goods
Security Camera Module | TI 1.3mp 960P DM365/DM368+AR0130

Tuesday, September 08, 2015

Module parameters HD-960P-38*38mm 1.3megapxel low-illumination HD web camera Network Camera - Sensor type 1/4 inch、1.3megapixel , CMOS low-illumination width dynamic sensor - Minimum illumination Color: 1 Lux/F1.2, black and white: 0.02Lux/F1.2 - Electronic shutter 1/5 second ~ 1/50...

ZT Technology Group Ltd.

France 59590 B2B Services
DIN BELLOWS GLOBE VALVE

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Bellows Seal Stop Valves(Straight-Through Type) DIN Bellows Seal Stop Valve DIN Bellows Globe Valve DIN Faltenbalgventil Durchgangsform DIN Válvulas de fuelle DIN ventil uzavírací s vlnovcem přímý DIN Standard seteventil med belg (Rett løp modell) DIN Standardında Metal Körüklü...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935