GP9332C 10-200KVA Low Frequency Online UPS (200 kva UPS,online back UPS)

GP9332C 10-200KVA online back UPS snapshot:

Model: GP9312C 10-100KVA (3Ph/1Ph)
Model: GP9332C 10-200KVA (3Ph/3Ph)
Nominal Input Voltage: 380/400/415VAC
Output Power Factor: 0.8
Parallel: Maximum 8PCS UPS
Battery can be shared in parallel mode

High intelligence and reliable power supply:

GP9312C/GP9332C 200 kva UPS provides maximum protection for vital mission-critical networks, security applications (electromedical) and industrial applications thanks to its outstanding mechanical and electrical design.
The load is powered continuously by the inverter with a filtered, stabilised and regulated sinewave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges.
The GP9312C/GP9332C 200 kva UPS uses on-line double conversion technology (VFI) with isolation transformer on theinverter output.
The GP9312C/GP9332C is supplied with Watch & Save 3000 software as standard and can be remotely monitored using the Power NetGuard system from anywhere in the world. Additional battery extension packs allow the standard battery runtime to be extended up to several hours.

Application:

Servers
Local Area Network (LAN)
Data centers
Telecommunictions
Electro-medical equipment.

MINIMUM IMPACT ON SUPPLIES EASY SOURSE:

■Input current distortion <4% for the GP9312C/GP9332C with filter with sinusoidal absorption to remove the risk of resonance with other input supply users or phase shift capacitor sets. The absorbed current distortion is independent of input supply parameters such as impedance. This enable.<br /> ■GP9312C/GP9332C to deliver maximum performance levels regardless of the installation environment. With these input features GP9312C/GP9332C online back UPS can achieve significant savings in terms of sizing and power supply sourcesisolation transformers and generators over less sophisticated power systems.

MAXIMUM BATTERY CARE:

■Battery deep discharge protection;
■Temperature compensating charger;
■Built-in automatic and manual battery test feature.

SIMPLE TO INSTALL:

■Capability to install the online back UPS into any distribution system (neutral not required on rectifier input);
■Capability to separate the rectifier/bypass power networks and to power these from two separate sources, without Galvanic isolation (Necessary on 200 kva UPS without an output transformer).

HIGH RELIABILITY:

■Extremely high short-circuit current to ensure compatibility with the most difficult transformer applications (lighting, drives and industrial processes) and an isolation transformer on the inverter output;
■Full microprocessor control with no-break static and manual bypasses;
■IGBT technology.

OTHER CHARACTERISTICS:

■0.8 power factor make GP9312C/GP9332C suitable for powering ICT and Industrial loads;
■High level diagnostics: event log with 128 messages, states,measurements and alarms – available from the built-in LCD with several languages;
■BACK FEED protection: to avoid energy feeding back into the mains supply cause a fault occur.

MAXIMUM RELIABILITY AND AVILABILITY:

Connect up to 6 units in parallel or N+1 redundancy, even of different power ratings.The online back UPS continue to work in parallel even if one of the interconnecting communication cables is disconnected (CLOOSED LOOP).

LOW CONSUMPTION LEVELS:

GP9312C/GP9332C can achieve efficiencies >98% thanks to selectable Economy Mode which can be used in stable electrical environments to provide power supply continuity when the mains fail.

ADVANCE COMMUNICATION:

■Compatible with TeleNetGuard for remote maintenance；
■Advanced, multi-platform communication for all operation systems and network environments: Watch & Save 3000 monitoring and shut-down software included, with SNMP agent, for Windows 2008, Vista,2003, XP; Mac OS X,Linux, Novell and most popular Unix operating systems；
■The 200 kva UPS is supplied with a cable for direct connection to the PC(Plug and Play)；
■RS232 double Serial port；Installation slot for an Emergency Power Off (EPO) interface to allow the online back UPS to be switched off remotely in an emergency；
■Generator interface: enables desynchronisation of the 200 kva UPS output from a generator supply which may be subject to phase and frequency variations. The interface also enables more economic use of the battery charge.

SEO Article

As the most traditional static 200 kva UPS power supply, the first form of its circuit design is simple, the related technology has been quite mature, widely used. Online back UPS is generally limited to a small power range, the price is relatively cheap. When the city electricity is normal, the inverter will not work, directly from the city power supply to the load; when the city electricity problems, the inverter starts to work, the battery is released into the DC power supply, AC output to maintain the use of load. Online back UPS can solve the power interruption, upwelling of power supply, voltage sag three kinds of power problem. For other problems with power without any improvement, the traditional type of backup 200 kva UPS has several characteristics blow:
1.City electricity utilization rate is high, can be more than 98%, but only limited to linear load.
2.Input power factor and input current harmonic depending on the nature of the load, for nonlinear loads. The input peak non sinusoidal current large, input power factor is low, no loss of power, the input current harmonic of power grid pollution shortcomings.
3.Output voltage stability, frequency stability is poor.
4.City electrical interruption, switch to the battery power supply, the conversion time is generally 4ms ~ 10ms.
5.Output switch is limited by the ability to switch current and action time, so the general online back UPS more than 2KVA.