Genuine Ricoh Gen5 Printhead for mimaki
Quantity : 1 Price : $ 1110
Ricoh GEN4L27PL Printhead MH2820 is suitable for a range of oil, water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.
Technical Specifications
– Size: 13,2 x 120 x 75,5 mm (excluding cables)
– Head Materials: SST, Ni and Epoxy Adhesive (direct contact with ink)
– Nozzle Plate Surface: Non-wet coating
– Number of Nozzles: 2 x 192 nozzles
– Nozzle Spacing: 0,1693 mm
– Piezo Type: D33 Stacked PZT
– Temperature Control: Integrated Heater and Thermistor
– Operator Temperature range: Up to 80° C
– Native Drop Volume: 27 pl
– Drop Volume Range: 27-54 pl
– Jetting Frequency: Up to 30 kHZ
– Life: 100 billion actuations per nozzle
Contact : Bastian Bimo, +62 4 11 43 75 03
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Genuine Ricoh Gen5 Printhead for mimaki Search in a category : Electronics / Computers Search in a category : mimaki, ricoh, gen5, printhead, genuine |
Saturday, April 27, 2013
Quantity : 100000 - Price : US$0.004-US$0.01
SPECIFICATIONS Operating temperature rang -40ºC~+100ºC Capacitance range 0.01~2.2uF Capacitance tolerance J=5%,K=10%,M=20% Rated voltage 280VAC,50Hz-60Hz Dissipation factor ≤0.3%MAX.when measured at 10KHz,20ºC Insulation resistance(ir) Measured after a charging voltage...
Shenzhen Weidy Industrial Development Co,.LTD
- Cathy-Weidy
- 518000 - Shenzhen city
- 86 755 82565888
- 86 18823734558
Thursday, December 26, 2013
Quantity : good - Price : 10,00 €
As a leading manufacturer of mechanical seals and sealing products in China, Sino-Holding Co., Ltd, with over two hundred staff, in our three factories, are specialized in designing, manufacturing and marketing mechanical seals and sealing products. Founded in 1999, Sino-Holding...
Sino-Holding Co., Ltd
- 100020 - Beijing
- 010 56157697
- +86 18330262938
Thursday, March 10, 2016
Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s,25℃) Cure Time 3~7(d) After the curing Relative Density 1.40~1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45~55 (Shore...)
Guangzhou Usilicone Chemical Technology Co.,Ltd
- 523220 - Guangzhou
- +086 0769 88888312






