Gembird Filament ABS vert 3 mm 1 kg - 3DP-ABS3-01-G
Quantity : 100
Haute résistance, bonne ténacité
Faible densité: lors de l'impression d'un plus grand volume - le modèle est plus léger
Peut être appliqué à une variété d'imprimantes 3D
Matériel : ABS, diamètre 3 mm
Poids : 1 kg/bobine (2,2 lb)
Longueur: env. 140 m
Densité à 21,5°C : 1,01 g/cm3
Indice de débit de fusion à 10min, 2.16kg: 5
Point de fusion : 225 - 240 °C
Chaleur-Déviation-Température à 0,455 MPa: 85 °C
Limite d'élasticité à 5mm/min: 45 MPa
Résistance aux chocs : 16 KJ / m2
Rupture de l'ensile : 30 %
Diamètre : 3.00 ± 0.05 mm
Dimensions de la bobine : 200 mm de diamètre x 67 mm de hauteur x 53 mm trou central
Configuration système requise :
Une imprimante 3D avec extrudeuse de 1,75 mm de température autour de 230 °C, adaptée à une utilisation avec filament ABS
Contact : Nadia Yebba, +49 (69) 9 150 750 14
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Gembird Filament ABS vert 3 mm 1 kg - 3DP-ABS3-01-G Search in a category : Electronics / Computers Search in a category : gembird, vert, filament, abs3 |
Sunday, April 19, 2026
Quantity : 100 - Price : 3,00 €
LOT VESTE 3€ Avec 2 ou 3 boutons 2 poches à rabat et 1 poche poitrine 4 poches internes Poignées disposant de 4 boutons Composition :65% laine 35% coton Coloris Assortis : Noir, gris claire, gris foncé, vert kaki, beige, marron, bleu marine, etc,,, Unis, Rayures fines Tailles = 40 au 60 Marques: Stretch, Carletti, Romeo Class, Becker, Class man, Canda, Angelo Litrico, etc,,, Colisage= 30 pcs Veste =3€ Pantalon =4€ Gilet=1€ http://serviettes.sumupstore.com/ Tel= 0626845369 Location ...
Saturday, September 08, 2012
Quantity : enough - Price : depend on the size a
Introduction: This item consists of AL /bubble/ AL etc multi- layers of obstruction material. It is an environment friendly product which has good heat preservation and insulation properties. The outer layer of PET provides excellent abrading and tears resistance. The middle layer...
Shenzhen Star Packaging Product Co.,LTD
- wangquanhua
- 518110 - guanlan
- +13 9 26 56 86 79
Wednesday, February 24, 2016
Before the curing Appearance White paste Relative density 1.60~1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5(MPa) Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35~45(Shore A) Temperature Range -60~200(℃) Volume resistivity 2...
Guangzhou Usilicone Chemical Technology Co.,Ltd
- 523220 - Guangzhou
- +086 0769 88888312






