Fuel Injectors
Price : US$1.00
Auto fuel injector, is a part that injects fuel into the engine cylinder. It also is a simple solenoid valve. When the solenoid coil is energized, the suction force is generated, the needle valve is sucked up, the nozzle hole is opened, and the fuel is ejected at a high speed through the annular gap between the needle and the nozzle hole at the head of the needle valve, forming mist and is conducive to full combustion.
The car fuel injector itself is a normally closed valve, that is when no control signal is input, the valve is always closed. While the normally open valve is when there is no input control signal, the valve is always open, and a valve needle moves up and down to control the valve opening and closing. When the engine ECU sends a fuel injection command, its voltage signal will cause the current to flow through the coil in the car injector to generate a magnetic field to suck up the valve needle, so that the valve can be opened and the fuel can be ejected from the fuel injection hole.
The biggest advantage of fuel injectors produced and sold by MAPMS is that the fuel supply control is very precise so that the automobile fuel system can have the correct air-fuel ratio in any state, which not only keeps the engine running smoothly, but also the exhaust gas can meet the specification of environmental regulations.
Fuel Injectors Features
Strong self-cleaning ability, the nozzle holes are not easy to deposit carbon and block.
High performance of injection characteristics with good injection angle and good atomization effect.
Easy to clean.
What Are the Symptoms of a Bad Fuel Injectors?
Engine Jitter
When the fuel injector is damaged and the fuel injection is not smooth, the engine will have symptoms such as running jitter during the working process.
Power Drop and Fuel Consumption Increase
Once fuel injector is damaged, the fuel injection amount and fuel injection pressure cannot be guaranteed, which will cause the symptoms of vehicle power drop and fuel consumption increase.
Increased Exhaust Emission Pollution
The failure of fuel injector will inevitably affect the mixing and combustion of combustible gas mixtures, which will result in an increase in vehicle exhaust emissions.
Difficulty Starting or Even Stalling
If the fuel injector is seriously damaged, the vehicle will have difficulty in starting, or even suddenly stall during driving.
The Engine Lacks Cylinders
If the fuel injectors of individual cylinders are seriously damaged, the engine is very likely to have cylinder shortages, which will cause the engine to shake violently.
Black Smoke from Car Exhaust
As the damage of the fuel injector, the atomization of fuel and the mixing with air cannot be guaranteed, so the combustible mixture cannot be completely burned, resulting in black smoke from the vehicle.
For more information about car fuel injection system, please feel free to contact us!
If you need any kinds of car auto spares, please contact us, as one of the most professional car spares suppliers, MAPMS is willing to offer you high quality products.
Contact : MAPMS MAPMS, +86 139 2617 0287
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Fuel Injectors Search in a category : Everything else / Bulk Search in a category : injectors, fuel |
Wednesday, September 14, 2016
Quantity : 5000 - Price : 100,00 €
Bellows Seal Stop Valves (Angle Type) DIN Angle Type Bellows Sealed Stop Valve DIN Bellows Seal Globe Valve DIN Faltenbalgventil Eckform DIN Válvulas de fuelle(Paso angular.) DIN ventil uzavírací s vlnovcem rohový DIN Standard seteventil med belg (Vinkel modell) DIN Standardında...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Thursday, April 23, 2015
Evaporation ,magnetron series rolling vacuum coating machine are mainly used to do the metal film on the surface on the plastic, cloth ,paper, tinsel. Product category: According to the working principle can be divided into the following categories Resistance heating evaporation...
Shanghai LeadingCoating Vacuum Techbology Co., Ltd
- Leadingcoating
- 201206 - ShangHai
- 0086 21 50878199





