Francis Type Turbine for Hydro Power Generator

Product Description

Runner diameters: 0.35-2.5m
Suitable water head: H=10-300m
Capacity of the generator unit: 160-20000kw
The speed range of the turbine: 150-1000rpm

Hydro mechanical equipment, Control Systems, Excitation Systems, Generator excitations, Automation and controls, hydro facilities Francis turbine is suitable for middle and high water head, from 15 meter to 300 meters. The merits of this turbine include good operation stability, impacted structure, and relatively higher average efficiency. Vertical and horizontal shaft arrangements are both available. It is one of the most widely used turbines.

Product Feature
The features of the Francis Hydro Turbines (Mixed Turbines):

They operate in a head range of 20 meters to 450 meters and are primarily used for electrical power production.

The power output ranges from 160KW to 20000KW, Runner diameters are between 0.5 and 2.5 meters.

The speed range of the turbine is from 150 to 1000 rpm.

Excellent peak efficiency.

High efficiency also at partial water flow down to about 50%.

2 or 4 bearing gen-set arrangements.

Bearings rated for more than 100 000 hours of operation.

Guide vane control electrically or hydraulically.