Flange Molding
Price : 100USD
Flanged joint is the main connection method in pipeline construction. Compared to thermoplastic, thermoset bmc composite can be reprocessed. With high insulating properties, Insulated flange is widely applied in petroleum and chemical and other industries. Flange molding is injection and pressure molded, delivering consistent quality.
Advantages of SMC/BMC Flanges
Insulation property required by buried pipeline
Long-term stable performance under hard conditions
High strength and airtightness
Simple structure, easy to assembly, dismount and change parts
Corrosion free
SMC Flange Moulding
Reduce human factor to a minimum in production
Compression molding shortens the delivery time and produce constant quality
Well-suited for mass production of small diameter flanges
Flange Molding Surface Treatment
Outer surface is smooth and precise, needing no machining.
Interior surface can be machined according to requirements.
Flange Molding Specifications
|
Material |
Based on requirements |
|
Color |
Custom and depending on requirements |
|
Pressure rating |
custom |
|
Operation Temperature |
Depending on molding |
If you want to get more information about bmc compound, contact us.
Contact : Li Coffee, +86 15657163173
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Flange Molding Search in a category : Everything else / Bulk Search in a category : molding, flange |
230011 Second hand goodsReport abuse
Friday, October 25, 2013
Quantity : 1000 piece - Price : USD 0.1 / piece
- Material grades: N35 to N52, N44SH, N40UH, N38EH and N30AH - Br: up to 14.2kg (maximum) - Hcj: up to 35KOe (maximum) - BH: up to 54MGOe (maximum) - Surface treatment: zinc, nickel, Ni + Cu + Ni, epoxy, parylene, zinc/parylene and Ni + Cu + Ni + epoxy - Magnetizations...
Anhui Astromagnet Co., Ltd
- 230011 - Hefei ,Anhui
- 86 0551 63757870
24158 Equipment goodsReport abuse
Thursday, August 06, 2015
Quantity : 30 sets
The X. Y& Z axis utilizes AC servo motor. Multi-cavities machining, ORBIT-CUT machining & Helix machining. A.T.C. (Automatic Tool change) & C-axis machining available. The Circle Angle of Sparking is lower than 0.02mm. The best surface roughness (Ra) is better than 0...
Sane Kuei Machinery Co., Ltd
- Sane Kuei Machinery Co., Ltd
- 24158 - New Taipei City
- +886285112370
34510 Raw materialsReport abuse
Thursday, June 16, 2016
Application Method 1. Glue is applied on textile or leather. 2. Patterned or fully coated glue is fixed by heat before foil transfer properly. 3. Stamping the foil ,heat: 130C-150C, pressure 4-6 bar, touch time 3-5 s. 4. Discard the carrier film after stamping process.Different...
UES Makine Tekstil Inşaat ve Gida San.Tic.Ltd.Şti
- 34510 - Istanbul
- +902125571040
