Member's display QINSUN Qinsun Instruments Co., Ltd

Wednesday, September 06, 2017

Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary...

Wednesday, September 06, 2017

Footwear Flection Tester Standards: Satra TM92 & 77 Applications： The Footwear Flection Tester is designed to assess the flexing endurance of completed footwear in wet and dry conditions. Product information： The Footwear Flection Tester is supplied in both single or twin station...

Wednesday, September 06, 2017

Nail Bed Flammable Tester Standards: 16 CFR1510, ASTMF963?4.6.2 Applications: The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether...

Wednesday, September 06, 2017

VTEC Vertical Flammability Chamber： Testing Standards: ASTM D6413-99, DOC-FF 3/71, CALIF TB-117, GB/T 5455, CPAI-84 Applications: VTEC Vertical Flammability Chamber for measuring the vertical flame spread for childrens' sleepwear, fabrics, other textile materials or resilient filling...

Wednesday, September 06, 2017

Drill Flocking Performance Tester Testing Standards: GB/T 12705.1/14272, BS EN 12132-1 Applications: Drill Flocking Performance Tester is designed for determining the down-proof properties of fabric for the liner material, feather or fibers of winter clothes, down jacket, quilts...

Wednesday, September 06, 2017

Spray Rating Tester Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tester is used to determine the surface wetting resistance of fabrics. Product Information: The Spray Tester comprises a metal framework allowing...

Wednesday, September 06, 2017

MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics. Product Information: Fabric...

Wednesday, September 06, 2017

Thermal resistance wet resistance tester Testing Standards: GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates the heat and mass transfer processes which occur next to human skin. Measurement of thermal resistance...

Wednesday, September 06, 2017

Digital Autoburst Strength Tester Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS TM170 Applications: Digital Autoburst Strength Tester is used to determine the bursting strength and...

Wednesday, September 06, 2017

Digital Elmendorf Tearing Tester Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard...

Wednesday, September 06, 2017

Testing Standards: ASTM D5171 Applications: Button Impact Tester is used to determine the impact resistance of plastic sew-through flange buttons. Product Information: With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0...

Wednesday, September 06, 2017

Steaming Cylinder Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76 Applications: Used for steaming shrinkage test of fabric, meanwhile can perform reproducibility measurement for sh rink components that is produced in the process of fabric shrinkage. Product Information...

Wednesday, September 06, 2017

VeviVide CAC60 Light Cabinet Testing Standards: ASTM D1729, SAE J361, Tappi 7515, BS 950 Part A, AS 1580.6001.1 Applications: The consistency of the light sources in all VeriVide Colour Control Cabinets gives excellent viewing conditions for reliable colour critical decisions under...

Wednesday, September 06, 2017

Circular Locus Pilling Tester Testing Standards: GB/T 4802.1, JIG 040-1990 Product Information: The Circular Locus Pilling Tester is used for determining the pilling and fuzzing of all kinds of fabrics to evaluable the product quality and process, such as wool, chemical fiber, mixed...

Wednesday, September 06, 2017

Dry Cleaning And Washing Cylinder Testing Standards: AATCC 162, 16 CFR Part 1610 Applications: Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water, to prepare samples for flammability testing. Product Information...

Wednesday, September 06, 2017

Scorch/Sublimation Tester Testing Standards: ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850 Applications: Scorch/Sublimation Tester is used in the laboratory to evaluate colour fastness to dry heat, hot pressing and sublimation,...

Wednesday, September 06, 2017

Perspiration Tester Testing Standards: ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714 Applications: The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva...

Tuesday, September 05, 2017

Introduction Full automatic dry cleaning machine /laundry machine is suitable for the determination of the change of physical indexes such as the appearance color, size change and peel strength of the clothing and various textiles by organic solvent , alkaline solution after dry cleaning...

Tuesday, September 05, 2017

Introduction Change the boiler pipe to special pipe with magnetic force. The fuel molecules are refined so that the specific surface area of the fuel increases and promotes complete combustion. As the nature of the fuel changes, the combustion efficiency increases, so a small amount...

Tuesday, September 05, 2017

The high performance nanofiber filter bag, also known as nanofiber dust removal bag, is a dry dust collector. The filter element made of nanofibers with a diameter of 700nm is efficient in capturing solid particulates in air-born dust, which makes the filter bag an ideal material...

Tuesday, September 05, 2017

Introduction Electric heating fiber is made of metal microfilament and aramid fiber as raw materials, the use of new composite processing technology made of new fibrous heating element, in addition to excellent flexibility and can be rounded, but also has a very high strength. The...

Tuesday, September 05, 2017

Wyzenbeek Abrasion Tester Testing Standards: ASTM D4157 Applications: Wyzenbeek Abrasion Tester is used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen with a backward and forward motion over a curved surface. Particularly...

Tuesday, September 05, 2017

Melt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed for use in the determination of the heat-resistant properties of chemical fiber and blended fabrics to determine the effect of fabric resistance...

Tuesday, September 05, 2017

Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2 accuracy <0...)

Tuesday, September 05, 2017

Vertical & Horizontal Flame Test is a plastics flammability standard released by Underwriters Laboratories of the USA. The UL-94 standard classifies plastics according to how they burn in various orientations and thicknesses. Horizontal Flame Tests： UL-94-HB: slow burning on a...

Tuesday, September 05, 2017

Introduction The electric tracking index test is performed on a surface of a solid insulating material by applying a voltage to a platinum electrode of a predetermined size (2 mm x 5 mm) and dropping a predetermined volume of conductive liquid (0.1% NH 4 Cl) at a predetermined height...

Tuesday, September 05, 2017

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples...

Tuesday, September 05, 2017

The glow wire tester Brief Introduction About the glow wire tester operation instructions according to the GB5169 and GB4706 the design and manufacturing requirements with the standards so called glow wire test method, which apply to the fire danger test on electrical and electronic products...

Tuesday, September 05, 2017

Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree...

Tuesday, September 05, 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...