Member's display QINSUN Qinsun Instruments Co., Ltd

Wednesday, September 06, 2017

Schopper Abrasion Tester Testing Standards: DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion Tester is designed for evaluating the abrasion resistance of automotive trim materials under tension using a rotary...

Wednesday, September 06, 2017

Footwear Flection Tester Standards: Satra TM92 & 77 Applications： The Footwear Flection Tester is designed to assess the flexing endurance of completed footwear in wet and dry conditions. Product information： The Footwear Flection Tester is supplied in both single or twin station...

Wednesday, September 06, 2017

Nail Bed Flammable Tester Standards: 16 CFR1510, ASTMF963?4.6.2 Applications: The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether...

Wednesday, September 06, 2017

VTEC Vertical Flammability Chamber： Testing Standards: ASTM D6413-99, DOC-FF 3/71, CALIF TB-117, GB/T 5455, CPAI-84 Applications: VTEC Vertical Flammability Chamber for measuring the vertical flame spread for childrens' sleepwear, fabrics, other textile materials or resilient filling...

Wednesday, September 06, 2017

Drill Flocking Performance Tester Testing Standards: GB/T 12705.1/14272, BS EN 12132-1 Applications: Drill Flocking Performance Tester is designed for determining the down-proof properties of fabric for the liner material, feather or fibers of winter clothes, down jacket, quilts...

Wednesday, September 06, 2017

Spray Rating Tester Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tester is used to determine the surface wetting resistance of fabrics. Product Information: The Spray Tester comprises a metal framework allowing...

Wednesday, September 06, 2017

MMT Moisture Management Tester Testing Standards: AATCC 195, SN 1689.1, GB/T 21655.2 Applications: The Moisture Management Tester (MMT) is an equipment to measure the dynamic liquid transport properties of textiles such as knitted and woven fabrics. Product Information: Fabric...

Wednesday, September 06, 2017

Thermal resistance wet resistance tester Testing Standards: GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates the heat and mass transfer processes which occur next to human skin. Measurement of thermal resistance...

Wednesday, September 06, 2017

Digital Autoburst Strength Tester Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS TM170 Applications: Digital Autoburst Strength Tester is used to determine the bursting strength and...

Wednesday, September 06, 2017

Digital Elmendorf Tearing Tester Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard...

Wednesday, September 06, 2017

Testing Standards: ASTM D5171 Applications: Button Impact Tester is used to determine the impact resistance of plastic sew-through flange buttons. Product Information: With the equipment the impact resistance of plastic sew-through flange buttons can be determined that a falling mass of 0...

Wednesday, September 06, 2017

Steaming Cylinder Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76 Applications: Used for steaming shrinkage test of fabric, meanwhile can perform reproducibility measurement for sh rink components that is produced in the process of fabric shrinkage. Product Information...

Wednesday, September 06, 2017

VeviVide CAC60 Light Cabinet Testing Standards: ASTM D1729, SAE J361, Tappi 7515, BS 950 Part A, AS 1580.6001.1 Applications: The consistency of the light sources in all VeriVide Colour Control Cabinets gives excellent viewing conditions for reliable colour critical decisions under...

Wednesday, September 06, 2017

Circular Locus Pilling Tester Testing Standards: GB/T 4802.1, JIG 040-1990 Product Information: The Circular Locus Pilling Tester is used for determining the pilling and fuzzing of all kinds of fabrics to evaluable the product quality and process, such as wool, chemical fiber, mixed...

Wednesday, September 06, 2017

Dry Cleaning And Washing Cylinder Testing Standards: AATCC 162, 16 CFR Part 1610 Applications: Dry Cleaning and Washing Cylinder is designed for determining color fastness to dry cleaning and chlorinated pool water, to prepare samples for flammability testing. Product Information...

Wednesday, September 06, 2017

Scorch/Sublimation Tester Testing Standards: ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850 Applications: Scorch/Sublimation Tester is used in the laboratory to evaluate colour fastness to dry heat, hot pressing and sublimation,...

Wednesday, September 06, 2017

Perspiration Tester Testing Standards: ISO 105 E01/E02/E04, BS 1006, AATCC 15/106/107, DIN 54005, M&S C6/C7, NEXT TM4, DIN EN ISO 105 E01/E02/E04, GB/T 3992/5713/5714 Applications: The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva...

Tuesday, September 05, 2017

Introduction Full automatic dry cleaning machine /laundry machine is suitable for the determination of the change of physical indexes such as the appearance color, size change and peel strength of the clothing and various textiles by organic solvent , alkaline solution after dry cleaning...

Tuesday, September 05, 2017

Introduction Change the boiler pipe to special pipe with magnetic force. The fuel molecules are refined so that the specific surface area of the fuel increases and promotes complete combustion. As the nature of the fuel changes, the combustion efficiency increases, so a small amount...

Tuesday, September 05, 2017

The high performance nanofiber filter bag, also known as nanofiber dust removal bag, is a dry dust collector. The filter element made of nanofibers with a diameter of 700nm is efficient in capturing solid particulates in air-born dust, which makes the filter bag an ideal material...

Tuesday, September 05, 2017

Introduction Electric heating fiber is made of metal microfilament and aramid fiber as raw materials, the use of new composite processing technology made of new fibrous heating element, in addition to excellent flexibility and can be rounded, but also has a very high strength. The...

Tuesday, September 05, 2017

Wyzenbeek Abrasion Tester Testing Standards: ASTM D4157 Applications: Wyzenbeek Abrasion Tester is used to determine the abrasion resistance of fabrics when rubbed against a standard abradant or a wire mesh screen with a backward and forward motion over a curved surface. Particularly...

Tuesday, September 05, 2017

Melt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed for use in the determination of the heat-resistant properties of chemical fiber and blended fabrics to determine the effect of fabric resistance...

Tuesday, September 05, 2017

Introduction To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2 accuracy <0...)

Tuesday, September 05, 2017

Vertical & Horizontal Flame Test is a plastics flammability standard released by Underwriters Laboratories of the USA. The UL-94 standard classifies plastics according to how they burn in various orientations and thicknesses. Horizontal Flame Tests： UL-94-HB: slow burning on a...

Tuesday, September 05, 2017

Introduction The electric tracking index test is performed on a surface of a solid insulating material by applying a voltage to a platinum electrode of a predetermined size (2 mm x 5 mm) and dropping a predetermined volume of conductive liquid (0.1% NH 4 Cl) at a predetermined height...

Tuesday, September 05, 2017

The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard. Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples...

Tuesday, September 05, 2017

The glow wire tester Brief Introduction About the glow wire tester operation instructions according to the GB5169 and GB4706 the design and manufacturing requirements with the standards so called glow wire test method, which apply to the fire danger test on electrical and electronic products...

Tuesday, September 05, 2017

Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree...

Tuesday, September 05, 2017

Introduction： Multi Finger Scratch/Mar Tester uses tungsten carbide as a scratch to accurately detect surface damage caused by unconventional physical forms (such as scraping, grasping, planning etc). It can be used to detect the wear resistance of plastic parts in automobile interior...

Tuesday, September 05, 2017

A six station Colorfastness/Rubbing Tester used to determine crocking, color transfer, and abrasion resistance of leather, fabric, vinyl, stitched seams, plastics and other materials. Each station is equipped with a removable rub head and set of table clamps to facilitate up to six...

Tuesday, September 05, 2017

Introduction Crosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the evaluation of the sensory level of scratches, changes in color difference between scratched area and unscratched area, or the detaching situation...

Tuesday, September 05, 2017

Scratch/Shear Tester used for a variety of automotive interior materials, such as plastics, rubber, leather, fabric, coating materials, coating materials and other non-composite materials such as scratch resistance detection. Core advantages: Scratch/Shear Tester from Qinsunlab can...

Tuesday, September 05, 2017

Introduction scratches, plastic scraper three kinds of automotive industry common test methods into one. It is suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, coating materials, non-coated materials and other composite materials...

Tuesday, September 05, 2017

Reciprocating abrasion tester Brief Introduction Reciprocating abrasion tester used by way of rotary grinding, using different kinds of friction wheel rotational friction on the sample to detect wear performance for leather and plastic materials, make scientific evaluation of the...

Tuesday, September 05, 2017

Taber abraser(Abrader) consists of a rotary platform to place test specimen, a pair of articulated arms with friction wheel, a motor used to drive the turntable rotation, a counter used to set the rotation number of turntable with the automatic stop function, and a suction device...

Tuesday, September 05, 2017

Brief Introduction： The fogging tester used to test the properties under certain environmental conditions for leather and fabric fogging phenomenon, for the automotive, aircraft and other interior materials fogging performance at high temperatures volatile components of its evaluation...

Friday, September 01, 2017

Introduction Launder-ometer /washing color fastnesss tester can be used for washing, dry cleaning color fastness test. Double cylinder separation, respectively, with an independent operation control panel, can be carried out two different temperature experiments at the same time....

Friday, September 01, 2017

Testing Standards: ASTM D1230, FTMS 191-5908, CFR 16 Part 1610, CALIF TB 117, NFPA 702, GB/T 14644 Applications: 45 degree flammability tester is designed to determine the burning characteristics of textiles. Stainless steel test cabinet with glass observation panel provided with...

Friday, September 01, 2017

Horizontal Flammability Tester Standards: ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM D5132, JIS D1201, AU 169 Applications: The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for automotive...

Friday, September 01, 2017

Gelbo Flex flexing chamber is designed to measure the amount of fiber debris of non-woven fabrics in the dry state in accordance with ISO9073-10. It can be used to test dry lint fall performance of non-woven raw material and other textile materials. Test principle: the sample in the...

Friday, September 01, 2017

Introduction Weather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal natural climate and solar and other experimental conditions to to test the color and performance of textile dyes. It can also test the...

Friday, September 01, 2017

A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen consumption in the combustion process. The amount of heat generated is directly proportional to the severity of the fire, such as the rate...

Friday, September 01, 2017

Electronic Crockmeter Testing Standards: ASTM F1319, AATCC 8/165, BS 1006 D02, GB/T 3920, ISO 105 D02/X12, JIS L0849, M&S C8/C8A, NEXT TM6 Applications: Electronic Crockmeter/Rubbing Fastness Tester is used to determine the colour fastness of cotton, chemical fiber, blended,...

Friday, September 01, 2017

Random Tumble Pilling Tester Standards: ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D Applications: Random Tumble Pilling Tester is used to determine the pilling and fuzzing characteristics of textile fabrics. The test specimens with dimensions of 105×105mm are put in the chambers...

Friday, September 01, 2017

Introduction ICI pilling and snagging tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other fabrics easy to snag , especially for chemical fiber filament yarn and its deformation yarn products. It can quickly detect...

Friday, September 01, 2017

Martindale Abrasion And Pilling Tester Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark...

Friday, September 01, 2017

Hydrostatic Head Tester Testing Standards: GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN 20811/3321/3424, AFNOR G07-057, ISO 811, JIS L1092A, JIS L1092.B-a, JIS L1092 B-b, ASTM F903C, ASTM F1670, ASTM F1671, EN 1734, ISO 1420, FZ/T 01004 Applications: Hydrostatic Head Tester is designed...

Friday, September 01, 2017

Air Permeability Tester Testing Standards: BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251, EDANA 140.1, ASTM D737, AFNOR G07-111, ISO 7231 Applications: The Air Permeability Tester accurately and swiftly determines the resistance...

Friday, September 01, 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Friday, September 01, 2017

Digital bursting strength tester Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of application: Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics...

Thursday, August 31, 2017

Bacterial filtration efficiency Tester of face mask can quickly and accurately measure the filtration efficiency of filtration protection equipment and materials . Salt aerosols or oily aerosols can be used as the test carriers, which are in line with the requirements of US Occupational...

Thursday, August 31, 2017

Testing of Filter Media is important for both the development and optimization of filter materials, as well as for quality assurance during the production process. The most interesting features for the characterization of cleanable filter media are: ● Curve of pressure drop, ● Curve...