Member's display NPKERMAKHIM ermakhim

Tuesday, May 08, 2012

Glass bead for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls...

Tuesday, May 08, 2012

Glass Beads for Road Marking or also called Reflective Glass Beads improve the road marking line contrary reflection function. When driving at night, the lamp shines on the marking line with glass bead in it, the ray of lamp is reflected back parallely. So the driver can look at...

Tuesday, May 08, 2012

PMS-1,5P liquid Is applied as the heat-carrier in thermoregulation systems from-100 to +100. PMS differ from mineral oils a wide range of working temperatures - from - 40°С to +200°С, and also small dependence of viscosity and compressibility on temperature - even the...

Tuesday, May 08, 2012

Prevent formation of foam and destroy the formed foam in water and not water environments when coloring by disperse dyes with the big content of surface-active substances, and also in the chemical and pharmaceutical, paper and textile industry. Are used for preparation of penogasyashchy...

Tuesday, May 08, 2012

Boron produce amorphous B2O3 in the recovery of metallic sodium or potassium. Its density is 1.73 g/cm3.oron amorphous in small quantities is introduced into steel and some alloys for an improvement in their metallic properties. Additive steel (0.001-0.003)% of boron increases its strength...

Tuesday, May 08, 2012

Boron nitride (BN) is sometimes called white graphite. His get annealing technical boron or boron oxide in the atmosphere of ammonia. It is a white, similar to talcum powder, but the similarity with talc is purely external, much larger and deeper similarity is between the amorphous...

Tuesday, May 08, 2012

Carbide of boron B4c - black bright crystals, is decomposed above 2450c on the hardness it the third, inferior only to diamond and nitride of boron. Abrasive and grinding material; neutron absorber in the nuclear reactors.It adapts in atomic power engineering as the material of the rods...

Tuesday, May 08, 2012

Carbide of boron B4c - black bright crystals, is decomposed above 2450c on the hardness it the third, inferior only to diamond and nitride of boron. Abrasive and grinding material; neutron absorber in the nuclear reactors.It adapts in atomic power engineering as the material of the rods...

Tuesday, May 08, 2012

"The preparation of the polishing suspensionhe polishing powder ones ""steam”, for which it load into the not oxidizable capacity and pour with hot water (70-80) oC, so that the powder would be covered with water, several times intermix and give mixture to cool. After cooling they...

Tuesday, May 08, 2012

French chalk (powdered) is often used as an abrasive to polish something else, usually metal or another stone. It is very very fine and puts a soft glow on the object or material you are polishing. You mix it with a tiny bit of oil or water to polish the object and use a soft cloth...

Tuesday, May 08, 2012

Aluminium oxide, Zirconia - artificial material-is produced on the basis of electrocorundum white with the addition of zirconium oxide. This material has a very high strength. He is able to handle the material with the clamping force is about 10 times bigger than a normal grinding...

Tuesday, May 08, 2012

Polishing powder POLIRIT is a free-flowing crystalline powder from brown to yellowish color, based on a mixture of oxides of rare earth elements (Ce, La, Nd).Polirit - versatile powder for polishing a wide range of optical glasses, lenses, mirrors and other glass products, electronic equipment...

Tuesday, May 08, 2012

"Polishing powder OPTIPOL is a free-flowing crystalline powder from brown to yellowish color, based on a mixture of oxides of rare earth elements (Ce, La, Nd).Polirit - versatile powder for polishing a wide range of optical glasses, lenses, mirrors and other glass products, electronic equipment...

Tuesday, May 08, 2012

White electrocorundum (brands: 25A, 24A, 23A, with the Al2O3 content of no more than 99%).Obtained from the alumina abrasive higher grade (25A), it possesses high hardness, strength, heat resistance, high brittleness and high cutting capacity, he has a slight number of impurities...

Tuesday, May 08, 2012

White electrocorundum (brands: 25a, 24a, 23a, with the Al2O3 content of no more than 99%).Obtained from the alumina abrasive higher grade (25a), it possesses high hardness, strength, heat resistance, high brittleness and high cutting capacity, he has a slight number of impurities...

Tuesday, May 08, 2012

Silicon carbide black (CCH 53C, 54C)has a black content of silicon carbide SiC - 96-99%. It is produced through the restoration of silica in resistance furnaces. Distinguished by high hardness, abrasive ability and fragility (grains have the form of thin plates, thus increasing their...)

Tuesday, May 08, 2012

"Silicon carbide black (CCH 53C, 54C)has a black content of silicon carbide SiC - 96-99%. It is produced through the restoration of silica in resistance furnaces. Distinguished by high hardness, abrasive ability and fragility (grains have the form of thin plates, thus increasing their...)

Tuesday, May 08, 2012

Green silicon carbide (CCH 63C, 64C) is used for the manufacture of medium and small circles grits. It has high hardness and cutting ability, is used for production of abrasive tools, grinding of cast iron, hard metal, nonferrous metals, stone and glass. It has high fire resistance...

Tuesday, May 08, 2012

Green silicon carbide (CCH 63C, 64C) is used for the manufacture of medium and small circles grits. It has high hardness and cutting ability, is used for production of abrasive tools, grinding of cast iron, hard metal, nonferrous metals, stone and glass. It has high fire resistance...

Tuesday, May 08, 2012

Chromium electrocorundum is obtained during the introduction of the oxide of chromium into the fusion of alumina. It has painting of ruby. The intensity of painting depends on a quantity of oxide of chromium, dissolved in the corundum. The abrasive ability of grain of chromium electrocorundum...

Tuesday, May 08, 2012

Normal (grades: 16a, 15a, 14a, 13a, containing (93-96)% Al2O3 and smelted with reduction of bauxite).Due to the high content of aluminum oxides and a small number of impurities in corundum, its crystals are larger. It has increased the viscosity, therefore used in the manufacture...

Tuesday, May 08, 2012

Normal (grades: 16a, 15a, 14a, 13a, containing (93-96)% Al2O3 and smelted with reduction of bauxite).Due to the high content of aluminum oxides and a small number of impurities in corundum, its crystals are larger. It has increased the viscosity, therefore used in the manufacture...